Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	FAG
	Product Type	Ball Bearing
	Inside Diameter	15mm
	Outside Diameter	32mm
	Race Width	9mm
	Cage Material	Steel
	Ball Material	Steel
	End Type	Closed
	Number of Rows	1
	Static Load Rating	2.85kN
	Internal Clearance	CN
	Dynamic Load Rating	6.3kN
	Standards/Approvals	No
	Series	60-C-2Z
	Bore Type	Parallel
	Limiting Speed	31500rpm
	Race Type	Plain
	Bearing Type	Single Row Deep Groove Ball

	Select all
	Brand FAG
	Product Type Ball Bearing
	Inside Diameter 15mm
	Outside Diameter 32mm
	Race Width 9mm
	Cage Material Steel
	Ball Material Steel
	End Type Closed
	Number of Rows 1
	Static Load Rating 2.85kN
	Internal Clearance CN
	Dynamic Load Rating 6.3kN
	Standards/Approvals No
	Series 60-C-2Z
	Bore Type Parallel
	Limiting Speed 31500rpm
	Race Type Plain
	Bearing Type Single Row Deep Groove Ball

COO (Country of Origin):: PT

Schaeffler Generation C Series Ball Bearing, 15mm Inside Diameter, 32mm Outside Diameter - 6002-C-2Z >V

This ball bearing is a single-row deep-groove component designed to support radial loads and enable high-speed rotation in Compact assemblies. It is suited to precision electromechanical systems where a sealed, parallel-bore bearing with measured internal clearance is required for continuous operation across a wide temperature span.

Features & Benefits

• Steel shields prevent contamination while maintaining low friction
• Parallel bore design allows straightforward shaft mounting
• CN internal clearance for predictable axial and radial play
• Dynamic load capacity 6.3 kN for sustained radial loads
• Limiting speed 31,500 r/min for high-speed instrument use
• Closed ends reduce lubricant loss and ingress risk

Applications

• Suitable for motor shafts in automation equipment
• Ideal for spindle support in Compact rotary encoders
• Used with precision fans in electronics cooling systems
• Can be used for small gearbox radial support
• Suitable for actuator shafts in electrical actuators

What materials form the running and cage elements?

The rolling elements are steel with a steel sheet-metal cage to support ball guidance and durability.

How is thermal range handled during operation?

It operates between -20°C and 120°C, allowing use across common industrial ambient and elevated temperatures.

What mounting clearances are relevant for housing shoulders?

Minimum shaft shoulder diameter for mounting is 17 mm and maximum housing shoulder diameter is 30 mm to ensure correct seating.

Which speeds should be used as a reference for continuous service?

Use the reference speed of 23,200 r/min for typical continuous operation and limit operation below 31,500 r/min.

What dimensions determine fillet and chamfer limits during installation?

Maximum fillet radius allowed is 0.3 mm and minimum chamfer dimension is 0.3 mm to prevent interference.

FAG 6002-C-2Z>V 1 Row Ball Bearing - 15 mm ID, 32 mm OD

FREE delivery for orders over ₱3,000.00