SKF 626-2Z/C2LHT23 1 Row Deep Groove Ball Bearing - 6 mm ID, 19 mm OD

This deep-groove ball bearing provides reliable rotary support for Compact electromechanical assemblies and automation equipment. It is designed as a single-row steel-ball bearing with shielding on both sides, intended for installations that require moderate static capacity and sustained high-speed operation within confined radial spaces.

• Shielded design enables contamination resistance during operation
• C2 internal clearance reduces axial play for precise positioning
• Sheet-metal cage minimises mass for quicker acceleration
• Dynamic load capacity 2.34 kN supports sustained radial loads
• Static load rating 0.95 kN resists deformation under sTOPpage
• Rated TOP speed 40,000 r/min allows high-speed applications

• Suitable for high-speed motor shafts in small drives
• Ideal for spindle assemblies in automation pick-and-place equipment
• Used with miniature fans and cooling blowers in electronics
• Can be used for rotary encoders and precision sensors
• Used for electrical actuator shafts in Compact mechanisms

The internal bore is cylindrical and sized at 6mm to suit standard shaft fits common in miniature assemblies.

Metal shields reduce ingress of debris and loss of lubricant, extending service intervals compared with open bearings.

The sheet-metal cage offers low thermal expansion and reduced centrifugal distortion at high rotational speeds.

It is configured as a single-row deep-groove design primarily to accommodate radial loads while permitting limited axial load in both directions.