STMicroelectronics, AC/DC Converter, 12V 16-Pin, SO-16N
- RS Stock No.:
- 165-3175
- Mfr. Part No.:
- VIPER0PHDTR
- Manufacturer:
- STMicroelectronics
This image is representative of the product range
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 165-3175
- Mfr. Part No.:
- VIPER0PHDTR
- Manufacturer:
- STMicroelectronics
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | STMicroelectronics | |
| Product Type | AC/DC Converter | |
| Maximum Input Voltage | 30V | |
| Maximum Output Voltage | 12V | |
| Output Power | 12W | |
| Mount Type | Surface | |
| Pin Count | 16 | |
| Switching Frequency | 60MHz | |
| Package Type | SO-16N | |
| Minimum Input Voltage | 4.5V | |
| Topology | Flyback | |
| Maximum Duty Cycle | 80% | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 1.5mm | |
| Standards/Approvals | RoHS | |
| Series | VIPer0P | |
| Width | 4mm | |
| Length | 10mm | |
| Automotive Standard | No | |
| Supply Current | 1.5mA | |
| Select all | ||
|---|---|---|
Brand STMicroelectronics | ||
Product Type AC/DC Converter | ||
Maximum Input Voltage 30V | ||
Maximum Output Voltage 12V | ||
Output Power 12W | ||
Mount Type Surface | ||
Pin Count 16 | ||
Switching Frequency 60MHz | ||
Package Type SO-16N | ||
Minimum Input Voltage 4.5V | ||
Topology Flyback | ||
Maximum Duty Cycle 80% | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 1.5mm | ||
Standards/Approvals RoHS | ||
Series VIPer0P | ||
Width 4mm | ||
Length 10mm | ||
Automotive Standard No | ||
Supply Current 1.5mA | ||
The VIPerPlus series of high-voltage converters combines an 800 V avalanche-rugged MOSFET with a leading-edge PWM controller. With extremely low total standby consumption (less than 4 mW at 230 VAC) and high efficiency over a wide load range, VIPerPlus devices enable SMPS designs meeting the most demanding energy-saving regulations with enhanced reliability and scalability, and can cut in half the component count. The VIPer0P is characterized by a unique zero-power mode and is Ideal for all SMPS up to 7 W with a wide input voltage range.
Smart stand-by architecture using the zero-power mode (ZPM)
ZPM management by MCU easily realizable
800 V avalanche-rugged power MOSFET
Embedded HV startup and sense-FET
Current mode PWM controller
Drain current limit protection (OCP)
Jittered switching frequency reduces the EMI filter cost