End Mills

An end mill is a type of cutting tool that is used in milling applications. End Mills have cutting edges on the end and sides of the shank enabling them to cut in all directions.

Why use an end mill?

The end mill removes material by their movement within the milling machine or from the cutter's shape.

The number of flutes (spirals on the end mill) give different results:

  • 2 flutes allow maximum space for chip ejection and are used for general milling operations
  • 3 flutes is an excellent choice for slotting, it has a larger cross-section and is used in general milling operations
  • 4, 5, 6 and 8 flutes can improve the surface finish if the feed rate remains the same. A greater number of flutes reduces chip load and produces a much finer finish

What types of End Mills are available?

End cut types:

  • Centre cutting end mills have one or more cutting edges at the tip to allow the user to plunge, drill or ramp into a cut.
  • Non-Centre cutting end mills have peripheral teeth that allow the user to side cut or contour an external surface.

Shank Types

  • End mills with a plain shank are used with a collet style holder and are the most common shank type
  • End mills with a Weldon shank have one or two flats with set screws in the holder that tighten on the flanks of flats to hold the mill to prevent it from rotating

Typical applications of End Mills

End mills are used for profile milling, face milling, tracer milling, semi-finishing and finishing.

592 Products showing for End Mills

In Stock
CIF Diamond Milling Cutter, 2.5 mm Cutter, Tungsten Carbide, 3.17mm Shank
  • RS Stock No. 218-9189
  • Mfr. Part No. DUFD2
Subtotal (1 unit)
PHP527.20(exc. VAT)
PHP527.20/unit
Stocked by manufacturer
Dormer End Mill, 6 mm Cutter, Carbide, 6mm Shank, 38 mm Cut Length
  • RS Stock No. 729-434
  • Mfr. Part No. S7186.0
Subtotal (1 unit)
PHP3,333.91(exc. VAT)
PHP3,333.91/unit
Stocked by manufacturer
Dormer End Mill, 7 mm Cutter, Solid Carbide, 8mm Shank, 19 mm Cut Length
  • RS Stock No. 625-538
  • Mfr. Part No. S9227.0
Subtotal (1 unit)
PHP1,361.85(exc. VAT)
PHP1,361.85/unit
Stocked by manufacturer
Dormer End Mill, 10 mm Cutter, Solid Carbide, 10mm Shank, 22 mm Cut Length
  • RS Stock No. 729-336
  • Mfr. Part No. S76610.0
Subtotal (1 unit)
PHP5,773.80(exc. VAT)
PHP5,773.80/unit
Stocked by manufacturer
Dormer Slot Drill, 4.5 mm Cutter, Carbide, 6mm Shank, 5 mm Cut Length
  • RS Stock No. 728-934
  • Mfr. Part No. S803HA4.5
Subtotal (1 unit)
PHP2,421.27(exc. VAT)
PHP2,421.27/unit
Stocked by manufacturer
Dormer End Mill, 3 mm Cutter, Carbide, 6mm Shank, 9 mm Cut Length
  • RS Stock No. 729-359
  • Mfr. Part No. S7103.0
Subtotal (1 unit)
PHP1,981.72(exc. VAT)
PHP1,981.72/unit
In Stock
Dormer End Mill, 2 mm Cutter, Solid Carbide, 3mm Shank, 6 mm Cut Length
  • RS Stock No. 625-535
  • Mfr. Part No. S9222.0
Subtotal (1 unit)
PHP882.39(exc. VAT)
PHP882.39/unit
Stocked by manufacturer
Dormer End Mill, 10 mm Cutter, Carbide, 10mm Shank, 57 mm Cut Length
  • RS Stock No. 729-425
  • Mfr. Part No. S71810.0
Subtotal (1 unit)
PHP6,146.31(exc. VAT)
PHP6,146.31/unit
Stocked by manufacturer
Dormer Slot Drill, 3.5 mm Cutter, Carbide, 6mm Shank, 7 mm Cut Length
  • RS Stock No. 728-763
  • Mfr. Part No. S813HB3.5
Subtotal (1 unit)
PHP2,356.08(exc. VAT)
PHP2,356.08/unit
Stocked by manufacturer
Dormer End Mill, 2 mm Cutter, Carbide, 3mm Shank, 6.5 mm Cut Length
  • RS Stock No. 729-355
  • Mfr. Part No. S7102.0
Subtotal (1 unit)
PHP1,981.72(exc. VAT)
PHP1,981.72/unit
Stocked by manufacturer
Dormer Slot Drill, 2.5 mm Cutter, Carbide, 6mm Shank, 12 mm Cut Length
  • RS Stock No. 729-080
  • Mfr. Part No. S8232.5
Subtotal (1 unit)
PHP2,238.75(exc. VAT)
PHP2,238.75/unit
Stocked by manufacturer
Dormer End Mill, 12 mm Cutter, Carbide, 12mm Shank, 50 mm Cut Length
  • RS Stock No. 729-213
  • Mfr. Part No. S71712.0
Subtotal (1 unit)
PHP6,938.81(exc. VAT)
PHP6,938.81/unit
Stocked by manufacturer
Dormer Slot Drill, 3 mm Cutter, Carbide, 6mm Shank, 12 mm Cut Length
  • RS Stock No. 729-066
  • Mfr. Part No. S8223.0
Subtotal (1 unit)
PHP2,081.36(exc. VAT)
PHP2,081.36/unit
Stocked by manufacturer
Dormer End Mill, 2 mm Cutter, Carbide, 4mm Shank, 6.5 mm Cut Length
  • RS Stock No. 729-371
  • Mfr. Part No. S7132.0
Subtotal (1 unit)
PHP2,018.97(exc. VAT)
PHP2,018.97/unit
In Stock
Dormer End Mill, 1 mm Cutter, Solid Carbide, 3mm Shank, 3 mm Cut Length
  • RS Stock No. 263-7752
  • Mfr. Part No. S7101.0
Subtotal (1 unit)
PHP4,157.58(exc. VAT)
PHP4,157.58/unit
Stocked by manufacturer
Dormer End Mill, 16 mm Cutter, Carbide, 16mm Shank, 32 mm Cut Length
  • RS Stock No. 729-096
  • Mfr. Part No. S76316.0XR3.0
Subtotal (1 unit)
PHP13,457.61(exc. VAT)
PHP13,457.61/unit
Stocked by manufacturer
Dormer End Mill, 6 mm Cutter, Solid Carbide, 6mm Shank, 13 mm Cut Length
  • RS Stock No. 729-160
  • Mfr. Part No. S7676.0XR0.5
Subtotal (1 unit)
PHP3,686.85(exc. VAT)
PHP3,686.85/unit
Stocked by manufacturer
Dormer End Mill, 8 mm Cutter, Carbide, 8mm Shank, 31 mm Cut Length
  • RS Stock No. 729-424
  • Mfr. Part No. S7178.0
Subtotal (1 unit)
PHP3,805.12(exc. VAT)
PHP3,805.12/unit
Stocked by manufacturer
Dormer End Mill, 10 mm Cutter, Solid Carbide, 10mm Shank, 22 mm Cut Length
  • RS Stock No. 729-346
  • Mfr. Part No. S76710.0XR0.3
Subtotal (1 unit)
PHP6,845.68(exc. VAT)
PHP6,845.68/unit
Stocked by manufacturer
Dormer End Mill, 4.8 mm Cutter, High Speed Steel-E-PM, 6mm Shank, 13 mm Cut Length
  • RS Stock No. 728-7835
  • Mfr. Part No. C2473/16
Subtotal (1 unit)
PHP3,741.69(exc. VAT)
PHP3,741.69/unit
1
4
30
Results per page

Popular Searches

Related links

Be the first to know about our latest products and offers

Email address

The personal information you provide to us when signing up to this mailing list will be processed in line with the Privacy Policy