Cutters

Cutters are handheld tools designed for cutting a variety different materials, such as wires, and other smaller objects potentially too small to be worked on by hand. Typically consisting of two levers connected closer to one end by a fulcrum, with the shorter end forming the jaw, cutters come in a variety of types and sizes. The three basic types are locking, adjustable and non-adjustable.

In order to ensure user comfort, most models of cutters will have insulated handles, allowing you to be protected whilst working and providing a firm and comfortable grip. In addition to standard insulation or cushioning, some cutters will be VDE-insulated to protect the user when working with electrical equipment.

What are cutters used for?

While the name may be fairly clear, some variations of cutters can also be used to perform other actions. For example, linesmans cutters also have a small flat section along the jaw for gripping objects as well as their cutting surface. The application will dictate which is the best type of cutter for you to use.

Types of Cutters

Used by professionals and DIYers alike to cut wires effectively, there are many types of cutters designed for specific applications:

  • Diagonal cutters, also known as side cutters or side cutter pliers, are ideal for gripping, splicing or cutting wires, as well as stripping wire insulation. They cut by indenting and wedging the wire apart and give a cleaner cut than using a knife or scissors.
  • End cutters are also known as nippers and are used to cut through wire, springs, nails, bolts and rivets. They have an almost flat-bladed head, which allows for a cut close against the surface without digging into it.
  • Wire rope cutters are used for the clean shearing of wire rope without fanning. The jaws pull the wire rope into them and trap the cable before performing a clean cut.
  • Snipe nose or needle nose cutters are designed to hold fine objects and cut them cleanly without applying pressure to the wider area, which larger cutters may do and cause damage.
  • Cable cutters or wire cutters are most commonly used in electrical applications and are designed specifically to be used with cables and wires. While most have some form of covered handle for user comfort, it is important not to confuse plastic or rubber coatings with electrical insulation.
  • Linesmans cutters are popular in communications and electrical tasks. They have a short gripping surface toward the tip of the jaw, and a cutting surface extends back to the fulcrum. They are ideal for cutting leads or stripping insulation.

For more information on cutters, cutter types and best practices, read our comprehensive guide here.


...
Read more Read less

Filters

Viewing 1 - 20 of 583 products
Results per page
Description Price Model Number Non Sparking Type Overall Length Jaw Length VDE/1000V Approved Height Safe ESD Safe Material Maximum Cutting Capacity Cutting Capacity Copper Wire Cutting Capacity Ductile Wire Cutting Capacity Iron Wire
RS Stock No. 536-329
BrandRS PRO
PHP811.26
Each
units
- - Side Cutters 110 mm - - - - - 1.2mm - - -
RS Stock No. 541-6898
BrandRS PRO
PHP16,333.86
Each
units
- - Ratchet Cable Cutter 250 mm - - - - - 240.0mm - - -
RS Stock No. 847-3784
BrandRS PRO
PHP1,135.06
Each
units
- - Electronic Cutters 114 mm - - - - Chrome Vanadium Steel - - - -
RS Stock No. 536-379
BrandRS PRO
PHP806.53
Each
units
- - Side Cutters 110 mm - - - - - 1.2mm - - -
RS Stock No. 875-5795
BrandRS PRO
PHP1,331.28
Each
units
- - Diagonal Cutters 160 mm - - - - Steel 2.0mm - - -
RS Stock No. 687-9893
Mfr. Part No.2171V-160
BrandBahco
PHP2,366.47
Each
units
- - Side Cutters 160 mm - - - - - 2.7mm - - -
RS Stock No. 157-6817
Mfr. Part No.95 06 230
BrandKnipex
PHP3,801.77
Each
units
- - Cable Shears 230 mm - Yes - - - 16.0mm - - -
RS Stock No. 621-629
Mfr. Part No.MS45RS-220
BrandSibille
PHP2,831.20
Each
units
- - Flush Cutters 220 mm - - - - - 55.0mm - - -
RS Stock No. 497-007
BrandRS PRO
PHP1,850.63
Each
units
- - Diagonal 180 mm - Yes - - Steel 2.7mm - - -
RS Stock No. 606-490
BrandRS PRO
PHP1,042.70
Each
units
- - Electronic Cutters 138 mm - - - - - 1.3mm 1.3mm - -
RS Stock No. 864-0805
BrandRS PRO
PHP928.88
Each
units
- - Electronic Cutters 127 mm - - - Yes HCS - - - -
RS Stock No. 248-1962
Mfr. Part No.74 91 250
BrandKnipex
PHP2,778.40
Each
units
- - Semi-Flush 250 mm - - - - Chrome Vanadium Steel 5.0mm - - -
RS Stock No. 487-242
BrandRS PRO
PHP1,254.20
Each
units
- - Diagonal Cutters 127 mm - - - - - 1.6mm - - -
RS Stock No. 763-8166
Mfr. Part No.73 06 160
BrandKnipex
PHP3,404.73
Each
units
- - Diagonal 160 mm - Yes - - Chrome Vanadium Steel 12.0mm - - -
RS Stock No. 524-3511
Mfr. Part No.79 42 125
BrandKnipex
PHP3,601.26
Each
units
- - - - - - - - - - - - -
RS Stock No. 106-161
Mfr. Part No.68 01 180
BrandKnipex
PHP1,213.53
Each
units
- - End Cutter 180 mm - - - - Steel 4.0mm - - -
RS Stock No. 254-298
Mfr. Part No.2233D 240
BrandBahco
PHP3,313.57
Each
units
- - Flush Cutters 240 mm - - - - - - - - -
RS Stock No. 187-8270
Mfr. Part No.64 12 115
BrandKnipex
PHP2,832.10
Each
units
- - Electronics End Cutting Nipper 115 mm 6.0mm - - - Steel 2.0mm - - -
RS Stock No. 864-0785
BrandRS PRO
PHP840.99
Each
units
- - Electronic Cutters 127 mm 8.0mm - - Yes HCS - - - -
RS Stock No. 864-0772
BrandRS PRO
PHP775.51
Each
units
- - Electronic Cutters 114 mm 7.0mm - - Yes HCS - - - -