Crimp Tool Positioners, Turrets & Locators

Crimp Tool Positioners are parts of a Crimping tool designed to adapt the tool frame to a particular application. Available in a wide selection of sizes and shapes locators guarantee versatility of every crimping tool. The data plate on each positioner designates which contacts the positioner accommodates for its wire size and indicates selector position. The positioners are easy to remove and replace when different connector size is required.


How easy crimping tools and positioners, turrets and locators are to use?


They are very easy to use, insert the contact pin into the hole of the crimp tool, load the wire into the contact pin, make sure it’s fully seated then and squeeze until the cycle finishes then finally check that you have a secure crimp.


How do you maintain the product?


There is very little maintenance required for this tool, keep the indenter tips free of debris and dirt.


The Importance of a High-Quality Crimp


When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the insulation crimp which provides strain relief against vibration and tension.The electrical connection must be gas-tight without any voids between the wire strands and the terminal. If there are any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.


...
Read more Read less

Filters

Viewing 1 - 20 of 158 products
Results per page
Description Price Type Series Number of Contacts Series Number
RS Stock No. 531-425
BrandRS PRO
PHP2,670.21
Each
units
Positioner QM/TNM 16 -
RS Stock No. 343-2826
Mfr. Part No.TH592
BrandGlenair
PHP14,637.72
Each
units
Turret AF8 - -
RS Stock No. 687-5762
Mfr. Part No.89853093A
BrandSouriau
PHP34,435.67
Each
units
Positioner MicroComp - -
RS Stock No. 864-6957
Mfr. Part No.1213860-1
PHP139,598.46
Each
units
Tool Holder CERTI-CRIMP II - -
RS Stock No. 864-6991
Mfr. Part No.1583659-1
PHP61,401.27
Each
units
Hydraulic Foot Pump - - -
RS Stock No. 876-2361
Mfr. Part No.525442-6
PHP12,222.77
Each
units
Plug Gauge - - -
RS Stock No. 314-7629
Mfr. Part No.640035
PHP4,862.90
Each
units
Positioner AS - -
RS Stock No. 314-7590
Mfr. Part No.TH163
PHP11,826.90
Each
units
Turret M22520/1-04 - -
RS Stock No. 314-8414
Mfr. Part No.86-5
PHP5,543.03
Each
units
Positioner M22520/7-06 - -
RS Stock No. 864-3368
Mfr. Part No.1583527-1
PHP155,550.29
Each
units
Pneumatic Adapter 626 - -
RS Stock No. 515-1096
Mfr. Part No.M22520/2-09
BrandGlenair
PHP16,099.15
Each
units
Positioner M22520/2-09 - -
RS Stock No. 864-7095
Mfr. Part No.1490746-1
PHP103,462.78
Each
units
Crimping Head - - -
RS Stock No. 827-3688
Mfr. Part No.3443-82-20
Brand3M
PHP16,214.41
Each
units
Locator 451 20 3443
RS Stock No. 876-2166
Mfr. Part No.601077
PHP4,821.93
Each
units
Indexing Device Bantam ROTA-CRIMP - -
RS Stock No. 876-2034
Mfr. Part No.1579005-1
PHP679.78
Each
units
Spring ERGOCRIMP - -
RS Stock No. 864-7017
Mfr. Part No.69082
PHP438,109.89
Each
units
Crimping Head DYNA-CRIMP - -
RS Stock No. 266-6876
Mfr. Part No.COMP-1
PHP5,807.62
Each
units
Positioner QM/TNM - -
RS Stock No. 360-1713
Mfr. Part No.TH1A
BrandGlenair
PHP13,682.40
Each
units
Turret M22520/1-02 - -
RS Stock No. 822-7717
Mfr. Part No.63811-8775
BrandMolex
PHP2,626.45
Each
units
Locator T9999 - 63811
RS Stock No. 827-3663
Mfr. Part No.3443-82-10
Brand3M
PHP16,214.41
Each
units
Locator 451 10 3443
Related Products
The 400 series provides a compact secure connection ...
Description:
The 400 series provides a compact secure connection where a high level of environmental sealing is required. For applications that require mains or signal transmissions where space is a premium, such as navigation and radar equipment, test equipment, data communications ...
Glenair Series 801 Mighty Mouse connectors feature a ...
Description:
Glenair Series 801 Mighty Mouse connectors feature a double-start modified stub ACME mating thread for improved protection against cross threading damage. The Mighty Mouse connector shells are machined from Aluminium and feature fluorosilicone seals and rear grommet protection from water ...
With har-speed M12 HARTING bases the Ethernet network ...
Description:
With har-speed M12 HARTING bases the Ethernet network on a sustainable M12 foundation. The har-speed M12 differs significantly from today's M12 connectors for Ethernet because it is based on a 4-pair connector face with paired shielding. This allows har-speed M12 ...
The 400 series provides a compact secure connection ...
Description:
The 400 series provides a compact secure connection where a high level of environmental sealing is required. For applications that require mains or signal transmissions where space is a premium, such as navigation and radar equipment, test equipment, data communications ...