Ring & Bush Mounts

Filters

Viewing 1 - 20 of 40 products
Results per page
Description Price Nominal Load Static Load Capacity Frequency Bore Diameter Outer Diameter Bore Length Material Maximum Operating Temperature Minimum Operating Temperature
RS Stock No. 688-414
Mfr. Part No.51840
BrandFabreeka
PHP106.189
Each (In a Pack of 20)
units
22 → 65lb - - 3/4in 1-3/8in 21/64in Neoprene +180°F -20°F
RS Stock No. 688-420
Mfr. Part No.60011
BrandFabreeka
PHP481.39
Each
units
18kg 35lb 15Hz 0.39in 1-1/4in 1-1/4in Neoprene +80°C -30°C
RS Stock No. 852-6260
Mfr. Part No.GEL Bush S-6
BrandTaica
PHP384.32
Each
units
0.2 → 0.75kg - 60 → 90Hz 4mm 11mm 6.5mm Brass (Collar), Silicone (Bush) +200°C -40°C
RS Stock No. 720-3449
Mfr. Part No.CGM6023-M
BrandFIBET
PHP601.01
Each
units
399daN - - 20.5mm 60mm 23.5mm Rubber, Steel - -
RS Stock No. 474-874
Mfr. Part No.A-1
BrandTaica
PHP339.78
1 Bag of 1
Bag(s)
0.5 → 2.5kg - 50 Hz, 95 Hz 3mm 14mm 8mm Brass, Silicone +200°C -40°C
RS Stock No. 688-307
Mfr. Part No.51822
BrandFabreeka
PHP96.183
Each (In a Pack of 20)
units
4 → 15lb - - 1/4in 13/16in 9/16in Neoprene +180°F -20°F
RS Stock No. 688-284
Mfr. Part No.51821
BrandFabreeka
PHP96.183
Each (In a Pack of 20)
units
2 → 10lb - - 1/4in 13/16in 9/16in Neoprene +180°F -20°F
RS Stock No. 688-329
Mfr. Part No.51823
BrandFabreeka
PHP100.858
Each (In a Pack of 20)
units
6 → 20lb - - 1/4in 13/16in 9/16in Neoprene +180°F -20°F
RS Stock No. 474-757
Mfr. Part No.B-2
BrandTaica
PHP471.13
1 Bag of 1
Bag(s)
15 → 32kg - 25 Hz, 40 Hz 4mm 25mm 11.5mm Brass, Silicone +200°C -40°C
RS Stock No. 720-3423
Mfr. Part No.CGM3614-W
BrandFIBET
PHP280.28
Each
units
84daN - - 8.5mm 36mm 14mm Rubber, Steel - -
RS Stock No. 295-1900
Mfr. Part No.53988660
BrandPaulstra
PHP835.47
Each
units
35 → 150daN 150daN 10 → 25Hz 13mm 50.8mm 35mm Rubber +70°C -
RS Stock No. 720-3436
Mfr. Part No.CGM3614-H
BrandFIBET
PHP196.70
Each
units
204daN - - 8.5mm 36mm 14mm Rubber, Steel - -
RS Stock No. 720-3427
Mfr. Part No.CGM3614-M
BrandFIBET
PHP199.80
Each
units
132daN - - 8.5mm 36mm 14mm Rubber, Steel - -
RS Stock No. 855-2231
Mfr. Part No.GEL Bush B-2 SUS
BrandTaica
PHP503.20
Each
units
- - 38 → 20 (Resonance Point)Hz 4mm 25mm 11.5mm Brass, Gel - -
RS Stock No. 442-319
Mfr. Part No.90755
BrandFabreeka
PHP53.801
Each (In a Pack of 20)
units
7kg 14kg 150Hz 6.30mm 18mm 21.45mm Neoprene +80°C -30°C
RS Stock No. 855-2234
Mfr. Part No.GEL Bush A-2 SUS
BrandTaica
PHP424.27
Each
units
- - 49 → 37 (Resonance Point)Hz 3mm 14mm 8mm Brass, Gel - -
RS Stock No. 688-436
Mfr. Part No.60012
BrandFabreeka
PHP481.39
Each
units
40kg 80lb 15Hz 0.39in 1-1/4in 1-1/4in Neoprene +80°C -30°C
RS Stock No. 442-303
Mfr. Part No.FLEX LOC Q5
BrandFabreeka
PHP38.396
Each (In a Pack of 20)
units
5kg 10kg 150Hz 5.40mm 15mm 18.10mm Neoprene +80°C -30°C
RS Stock No. 688-335
Mfr. Part No.51808
BrandFabreeka
PHP76.544
Each (In a Pack of 20)
units
6 → 20lb - - 15/32in 13/16in 1/4in Neoprene +180°F -20°F
RS Stock No. 474-741
Mfr. Part No.B-1
BrandTaica
PHP471.13
1 Bag of 1
Bag(s)
4 → 15kg - 35 Hz, 70 Hz 4mm 25mm 11.5mm Brass, Silicone +200°C -40°C
Related Products
Ring and bushing mounts are often used in ...
Description:
Ring and bushing mounts are often used in office machinery, motors, pumps, air conditioning and scientific equipment, offering structural support when installed in pairs. The location of the holes in the elastomer provides low frequency isolation, cushions shock and isolates ...
Chloroprene elastomer isolator mounts which provide protection against ...
Description:
Chloroprene elastomer isolator mounts which provide protection against severe shock and vibration in all mounting attitudes and reduce structure-borne noises.,Two types are available, suitable for axial loads of up to 18kg (9kg radial), or up to 40kg (13kg radial). Natural ...
S.T.C. supports consist of a rubber ring stuck ...
Description:
S.T.C. supports consist of a rubber ring stuck to a central tube so that the lower bezel supports the assembly.The design of this support gives it special characteristics:simple assembly, work under compression, effective anti-rebound and fail-safe mounting.
S.T.C. supports consist of a rubber ring stuck ...
Description:
S.T.C. supports consist of a rubber ring stuck to a central tube so that the lower bezel supports the assembly.The design of this support gives it special characteristics:simple assembly, work under compression, effective anti-rebound and fail-safe mounting.