Backplane connector contacts are small crimp contacts designed to be used with backplane connectors. These connectors simply mount to the cable or inside the housing and are used in backplane connectors to transfer current and signals. Backplane connector contacts are also sometimes called pins, and these pins are typically connected in parallel. You can use these connectors in your DIN 41612 applications.
Types of backplane connectors
Backplane connectors can be made from various metals (copper, brass and more) and contain different platings (Gold, Nickel, Palladium, Silver and more) for different applications. Some contacts are also terminated differently too, with some being crimp, solder or screw in.
DIN connector contacts are popular and will fit in housings that connect PCB's together.
Description:
DIN 41612 / 41617 and module connectors for
interconnection in all 19in Eurocard racking systems. Connectors are compatible with RS 19in sub-rack systems. Typical applications include telecommunications, data communications, measurement and control. The different connection variants include:. Power plug and ...
Description:
Z-PACK™ HM 2mm Type A backplane right angle
and vertical mounting header and receptacle connectors for a 2mm HM interface available as free or fixed board PCB mounting with ground return shielding options, ACTION PIN post contact options and various ...
Description:
The IEC 61076-4-101 connector has been designed to
meet high speed applications. This modular 2mm interconnection system uses increments of 25mm, with 5 rows of signal contacts, and the option of 2 additional rows for outer shielding. For compact PCI/VME ...
Description:
Copper alloy with gold over nickel plating.,The PCB
pin contacts protrude 5.6mm from the back of the connector to allow direct connection to a PCB. Plugs and receptacle may be fitted with either crimp pins or socketsIntegral cable clampBayonet locking ...
