brands

attributes.Type

attributes.Maximum_Load

attributes.Maximum_Height

attributes.Minimum_Height

attributes.Series

Enerpac Bottle Jack, 2t Maximum Load, 570mm - 1030mm Maximum Range

Enerpac Bottle Jack, 5t Maximum Load, 212mm - 437mm Maximum Range

Enerpac Bottle Jack, 10t Maximum Load, 219mm - 444mm Maximum Range

Enerpac Bottle Jack, 20t Maximum Load, 234mm - 459mm Maximum Range

Enerpac Bottle Jack, 15t Maximum Load, 228mm - 453mm Maximum Range

Enerpac Bottle Jack, 10t Maximum Load, 131mm - 223mm Maximum Range


A bottle jack, also referred to as a piston jack, is a piece of automotive equipment that is used to lift vehicles off the ground. Bottle jacks can be used as a temporary support but they are primarily designed for lifting. The vehicle should be placed on supports (such as axle stands) whilst the maintenance or repair is being carried out.

Bottle jacks are suited to heavy-duty applications and larger vehicles because their retracted height is typically around half the total height that they can lift. They are not suitable for low rise vehicles. Typical applications for bottle jacks include vehicles with a higher clearance such as SUVs, tractors and forklift trucks. For more information, please see our [complete guide](/web/generalDisplay.html?id=ideas-and-advice/axle-stands-guide).

### Why choose a bottle jack?

Bottle jacks have some advantages over trolley jacks. They are relatively light and more portable despite being able to lift the same weight or more. Bottle jacks take up less space than trolley jacks, giving you more space to work. They allow you to turn almost any environment into a garage or workshop.

### How do bottle jacks work?

Bottle jacks typically utilise hydraulic technology. Pumping the handle pushes pressurised oil into the main cylinder of the jack and causes the piston to raise. The piston will keep rising while you pump the handle, allowing you to lift the vehicle.

### Which bottle jack should I choose?

The choice of bottle jack depends on the weight that you want to lift. This is measured in tonnes and options normally range from 1 tonne (1000 kg) all the way through to 50 tonnes (50,000 kg).

### Maintenance

You must store bottle jacks upright. In order to prevent the hydraulics from the effects of corrosion, you should always keep the main piston and extension screw lowered.

### Axle stands

Axle stands are used to support a vehicle that has been raised off the ground. They support the axles of the vehicle and allow you safe access to work underneath the vehicle. Unlike jacks, axle stands are not designed to lift the vehicle, they only support it once lifted. Axle stands are typically construed from aluminium, steel, carbon steel, or cast iron. All of these materials are very strong and able to withstand a good deal of wear and tear. Axle stands are usually supplied in pairs to offer a balanced solution.



Bottle Jacks

Material Lifting & Loading Equipment

Access, Storage & Material Handling

1228569899

1370019343

1492797549

1805640584

1872595187

1950438482

2099506070

2911534392

2972144945

3089561311

3379516231

3702440375

3893962904

3999174723

4084450865

4292484756

482906937

595160564

607105215

630592386

1953764780

2854130884

3031041232

3606191116

3694170890

4239710393

Development Tools & Single Board Computers

Raspberry Pi, Arduino, ROCK, STEM Education & Development Tools

Electronic Components, Power & Connectors

Engineering Materials & Industrial Hardware

Pneumatic Counters, Logic Controllers & Timers

Electronics Cleaners & Protective Coatings

Enerpac Bottle Jacks

6 Products showing for Enerpac Bottle Jacks

Popular Searches