Espressif ESP-WROOM-02 2.5 → 3.6V WiFi Module, 802.11b, 802.11g, 802.11n GPIO, HSPI, I2C, I2S, IR, PWM, UART

  • RS Stock No. 135-9773
  • Mfr. Part No. ESP-WROOM-02
  • Manufacturer Espressif
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

ESP-WROOM-02 WiFi Module

The Espressif ESP-WROOM-02 is a low-power 32-bit MCU WiFi module. This small SMD module integrates the ESP8266EX WiFi chip and is designed for optimal RF performance. The ESP-WROOM-02 enables you to evaluate and further develop the device for you chosen application.
This module features a low-power mode. When operating at DTIM10 it will only consume 1.2 mW with WiFi connection. ESP-WROOM-02 operated with a frequency range of 2.4 GHz to 2.5 GHz.

Package
With a footprint of just 18 x 20 mm, the ESP-WROOM-02 is ideal for integration into compact devices, where space may be limited.

Memory
SPI Flash (16 Mb for storing programmes, data and firmware)
Internal SRAM and ROM

MCU
The on-board ESP8266EX device features the Tensilica L106 32-bit microcontroller and a 16-bit RSIC.

Crystal Oscillator
2.6MHz
± 10 PPM

Interfaces
HSPI – connect to SPI Flash, display and MCU
PWM – control LED lights, buzzers, relays and electronics machines (4-8 channels)
IR – IR remote control after programming (38 kHz)
ADC – test power supply and input power voltages
I2C – connect to external sensors and displays
UART – communicate with UART devices
I2S – Collect, process and transmit audio data

ESP8266 SDK
Espressif ESP8266 SDK (Software Development Kit) is an IoT development platform. Within it you will find examples of applications including Smart Lights and Smart Plugs.

Fully Certified
Wi-Fi Alliance, SRRC, FCC, CE, TELEC, IC & KCC Certified
RoHS, Halogen Free, REACH & CFSI Compliant
HTOL, ESD-HM, MSL, μHAST, HTSL
Output Power: +22dBm peak power in FCC certification

WLAN (WiFi) - Espressif

Specifications
Attribute Value
Supported Protocol 802.11b, 802.11g, 802.11n
Supported Security Standards WPA, WPA2
Supported Bus Interfaces GPIO, HSPI, I2C, I2S, IR, PWM, UART
Supply Voltage 2.5 → 3.6V
Dimensions 18 x 20 x 3mm
Height 3mm
Length 18mm
Maximum Operating Temperature +85 °C
Minimum Operating Temperature -40 °C
Width 20mm
118 In Global stock for delivery within 4 - 8 working days
Price Each (In a Pack of 2)
PHP 244.74
(exc. VAT)
PHP 274.11
(inc. VAT)
units
Per Unit
Per Pack*
2 +
PHP244.74
PHP489.48
*price indicative
Related Products
The UG96 is a Quectel UMTS/HSPA module offering ...
Description:
The UG96 is a Quectel UMTS/HSPA module offering a maximum data rate of 7.2Mbps downlink and 5.76Mbps uplink. Designed to provide customers with worldwide network coverage. It is an embedded 3G wireless communication module, supporting GSM/GPRS/EDGE® (Enhanced Data GSM Environment) ...
The Pmod WiFi provides wireless communication through a ...
Description:
The Pmod WiFi provides wireless communication through a Microchip MRF24WG0MA Wi-Fi™ radio transceiver module. • IEEE 802.11g-compliant 2.4GHz ISM band RF transceiver• OTA data rate: 2Mbps• Range: 400m (Line of sight)• Serialized unique MAC address• PCB antenna• Radio regulation ...
6LoWPAN (IPv6 over Low-Power Wireless Personal Area Networks) ...
Description:
6LoWPAN (IPv6 over Low-Power Wireless Personal Area Networks) refers to a communication protocol for transmission of IPv6 packets over energy-saving wireless networks. As a basis for radio communication here thestandard IEEE 802.15.4 (PHY and MAC) is served like it is ...
The RN1723 device from Microchip is an embedded ...
Description:
The RN1723 device from Microchip is an embedded 802.11b/g Wireless Local Area Network (WLAN) Module. On-board is a TCP/IP networking stack, cryptographic accelerator, power management subsystem, real-time clock, sensor interface, 2.4 GHz transceiver and RF power amplifier. 14 General Purpose ...