United Automation, DMFC36, Thyristor Trigger Module, 24V ac, 50 → 60Hz, 9-Pin, 160 x 62 x 62mm
- RS Stock No. 847-4715
- Mfr. Part No. DMFC36
- Manufacturer United Automation
Multi Mode, Phase-Angle & Single/Dual Cycle Burst Firing Circuit, DMFC-36
The DMFC-36 module has been designed to offer Phase-Angle or Burst Fire Control in firing a thyristor assembly or complete thyristor controller for driving resistive loads. In Single-Cycle or Dual-Cycle mode, these modules use the fastest burst rates possible, providing very accurate control and minimising Harmonic distortion & Flicker within the system.
Includes a Transformer
Standard Din Rail Mount
On Board Indication of Power, Burst-Rates & Fault Conditions
Phase-Angle, or Burst Fire Control
Single-Cycle / Dual Cycle Burst Fire modes of control or adjustable Standard Burst Firing
Soft-start (1 to 30 seconds)
Inhibit Input
Wide Range of Control Options: 0-5V, 0-10V, 1-5V, 2-10V, 0-20mA, 4-20mA, Manual Potentiometer
Isolated Pulse transformer outputs
On Board Protection Fuse
The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio. Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI is produced when using resistive loads.
| Attribute | Value |
|---|---|
| Input Voltage DC | 24V dc |
| Input Voltage AC | 24V ac |
| Output Isolation | 3.5kV |
| Mounting Type | DIN Rail |
| Pin Count | 9 |
| Dimensions | 160 x 62 x 62mm |
| Length | 160mm |
| Height | 62mm |
| Width | 62mm |
| Maximum Operating Frequency | 60 Hz |
| Maximum Operating Temperature | +65 °C |
| Minimum Operating Frequency | 50Hz |
| Minimum Operating Temperature | 0 °C |
