Pfannenberg FLZ510 CO Thermostat, 10 A, 100/250 V, 80 °C, -40 °C

View all Thermostats
Unavailable
RS will no longer stock this product.
RS Stock No.:
460-927
Mfr. Part No.:
17103000004
Manufacturer:
Pfannenberg
Find similar products by selecting one or more attributes.
Select all

Brand

Pfannenberg

Product Type

Thermostat

Sub Type

Thermostat

Contact Voltage

250V

Switch Configuration

CO

Supply Voltage

100/250 V

Maximum Operating Temperature

80°C

Contact Current

10A

Minimum Operating Temperature

-40°C

Standards/Approvals

RoHS, EN 60715

Temperature Setting Range

-40 to 80°C

Special Features

Heating Control

Series

FLZ510

COO (Country of Origin):
DE
The Pfannenberg Thermostats are used as temperature regulators and thus to control filter fans, electrical cabinet heaters or can serve as an alarm setpoint. They are available as N.C. / N.O. and changeover contacts. In combination with electrical cabinet heaters, they can control temperature and also, particularly in outdoor applications, ensure that the electrical cabinet is 'artificially' dehumidified. This means that the temperature is kept over the dew point so that no condensation forms from the air preventing a potential short circuit. The combination with filter fans provides additional savings on energy, maintenance time and therefore provides a better environmental balance which improves the filter fans effectiveness. The twin thermostat series combines two thermostats in all combinations for complex switching tasks.

Suitable for the operation of fans and heaters

Switching temperature difference 1K

Switching point tolerance +/3K

Temperature set range 20C to 80C

FLZ510: Changeover switch with spring contact

FLZ520: N.C. with spring contact (suitable to control heaters)

FLZ530: N.O. with spring contact (suitable to control fans)

FLZ541: N.C. and N.O. with spring contact in one housing

FLZ542: N.C. and N.C. with spring contact in one housing

FLZ543: N.O. and N.O. with spring contact in one housing

Extends the service life of heaters and fans

Optimized energy consumption for heaters and filter fans

Easy installation on profile rails

Electrical connection via screw terminals

IP 20 protection for installation inside the electrical cabinet

Approvals: cURus, EAC

Related links