PR Electronics 3112, Temperature to Current Signal Conditioner, Temperature -200 → +850 °C Input

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DK
Product Details

3000 Series - Temperature Converter

PR Electronics 3000 series temperature transmitters offer reliable and accurate conversion of industry process temperature signals to analogue or digital outputs. The easy DIP-switch set-up allows for more than 1000 different pre-calibrated temperature range combinations. The 3000 series are compact, fast, and easy to use. With a slim 6 mm housing that offers exceptional performance and EMC immunity for dedicated applications.
Designed and rated to operate between -25 ˚C to +70 ˚C, making these devices a good choice in applications where the ambient temperature changes greatly, for example in control panels mounted in outdoor locations. These transmitters have a low temperature coefficient achieving precise measurements, even when the panel is exposed to wide variations in ambient temperature. You can continue to rely on the output signal, with no need to re-calibrate your device.

Features and Benefits

• High basic 0.05% accuracy in all available signal ranges
• All units tested to ensure 2.5 kVAC isolation and have excellent noise immunity
• NAMUR NE21 burst A criteria
• Transmits rapid changes in process measurements to your PLC/DCS for fast and accurate monitoring of critical signals
• Response time of < 30 ms for temperature measurements
• Low temperature coefficient better than 0.01% / °C in a wide -25 to +70°C ambient temperature range for precise measurements
• Long term accuracy better than 0.1% / 3 years with no need for re-calibration

DIP-Switch Programming

Re-calibration is not needed after changing the DIP-switch range settings. Just change the DIP-switch, cycle the power to the unit and obtain the new, pre-calibrated I/O range. HART programming is enabled for selected devices.


Devices can be mounted both vertically and horizontally with no air gap separation required. The devices snap onto a power rail or DIN rail and are easily detached by lifting the bottom lock.

High Level of Isolation

Safe galvanic isolation of 2.5 kVAC provides high noise immunity and prevents ground loops for accurate delivery of the process signal to your control system.

Device Status Indicators

A front LED indicates device status, e.g. an error in the set-up, sensor or hardware.

Over Voltage and Polarity Protection

All terminals can withstand up to ±31.2 VDC and are protected against incorrect supply wiring to ensure safe, error-free installation.

PR Electronics DIN Rail Mounting

Attribute Value
Input Type Temperature
Supply Voltage 16.8 → 31.2 V dc
Minimum Operating Temperature -25°C
Maximum Operating Temperature +70°C
Series 3112
6 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 8,046.46
(exc. VAT)
PHP 9,012.04
(inc. VAT)
Per Unit
1 +
Related Products
Carel NTC probes are supplied in a plastic ...
Carel NTC probes are supplied in a plastic sheath with 6mm diameter, they are suitable for a variety of industrial applications. Designed to accompany a variety of Carel & Tempatron controllers. 6 x 15mm IP67 plastic sheath3m lead length.
Resistance thermometer PT1000 with wireless measurement transmissionFor working ...
Resistance thermometer PT1000 with wireless measurement transmissionFor working temperatures from -30 °C → +260 °CFor mobile or stationary temperature measurementsOutdoor range 300 mNo wiring required thanks to modern wireless technologyFail-safe transmission with telegram encodingPower supplied by a lithium ...
ifm Electronic TP Series Modular Temperature Transmitter features ...
ifm Electronic TP Series Modular Temperature Transmitter features two standardised M12 connections for simple electrical and process connection. The TP series temperature transmitters can be connected to two, three or four wire Pt100 or Pt1000 sensors. The measuring range has ...
Ifm Electronic TR series temperature sensors evaluation unit ...
Ifm Electronic TR series temperature sensors evaluation unit is a universal control and display unit for connection of Pt100 / Pt1000 sensors. TR series sensors automatically detects whether two, three or four wire sensors are connected. The measuring range has ...