Jumo 707051 Temperature Transmitter Analogue Input 32V dc, 70 °C, -10 °C

View all Temperature Transmitters
Unavailable
RS will no longer stock this product.

Alternative

This product is not currently available. Here is our alternative recommendation.

presentation
Jumo dTrans T05 Temperature Transmitter PT100 Input 35V, 70 °C, -40 °C
RS Stock No.
909-2907

Each

PHP13,814.32

(exc. VAT)

PHP15,472.04

(inc. VAT)

RS Stock No.:
279-245
Mfr. Part No.:
707051/8-06/000
Manufacturer:
Jumo
Find similar products by selecting one or more attributes.
Select all

Brand

Jumo

Product Type

Temperature Transmitter

Input Type

Analogue

Output Type

Analogue

Series

707051

Maximum Supply Voltage

32V dc

Minimum Operating Temperature

-10°C

Maximum Operating Temperature

70°C

Standards/Approvals

RoHS

Hazardous Area Certification

No

COO (Country of Origin):
DE
The Jumo Transmitter acquire sensor signals from RTD temperature probe, thermocouples, resistance transmitter or resistance/potentiometer. When using a resistance/potentiometer or RTD temperature probe, the sensor connection on the input side can be made in two-, three- or four-wire circuit. Voltage signals in the range of -100 to +1100 mV can also be recorded. Depending on the selection of the measuring input, the linearization variants linear, temperature linear and the possibility of a comfortably configurable customer-specific linearization are available. The configuration of the transmitter to probe type, probe connection technology, measuring range (freely adjustable) and linearization is carried out with a setup program on the PC. With the USB interface the min/max process value recorded by the transmitter, the min/max operating temperature can be read out and the sensor wiring can be checked online.

The operating status of the transmitter is signaled by a two color control LED

In a faulty free operation it lights up green

If a malfunction occurs, such as a probe break, this is shown by a blink code

The output signal of the transmitter is 4 to 20 mA or 0 to 10 V

The measuring input and the output signal are galvanically isolated from each other

Reversion of the output signal is possible for both types

The connection to the PC is established by a USB interface, which requires no additional auxiliary voltage

Related links