Freewheel/Bearing CSK-M 12mm

  • RS Stock No. 146-5262
  • Mfr. Part No. CSK 12-M
  • Manufacturer Stieber
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Type CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40). It is bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” type seals is recommended especially when the working temperature exceeds 50°C. Oil bath lubrication is also possible. All the CSK versions are equipped with “formchromed” sprags.

Specifications
Attribute Value
Series 6201
Inside Diameter 12mm
Outside Diameter 32mm
Race Width 10mm
Torque 9.3Nm
Over-running Speed 10000rpm
Dynamic Load Rating 6.1kN
Static Load Rating 2.77kN
Keyway Inner and Outer Race
Drag Torque 0.7Ncm
6 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 6,133.68
(exc. VAT)
PHP 6,869.72
(inc. VAT)
units
Per Unit
1 - 4
PHP6,133.68
5 +
PHP5,961.81
Related Products
Shielded bearings are fitted with two metal dust ...
Description:
Shielded bearings are fitted with two metal dust shields to prevent ingress of dirt and foreign matter. Primarily intended for applications where the bearing inner ring rotatesIf the outer ring rotates there is a danger that grease may be lost ...
INA from Schaeffler linear ball bearings KH and ...
Description:
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which ...
Thrust bearings suitable for unidirectional axial loads, supplied ...
Description:
Thrust bearings suitable for unidirectional axial loads, supplied as three-part assemblies comprising of two grooved outer raceways and a caged ball set. These bearings are not suitable for radial loads.,Typical applications include vertical shaft bearings, steering columns etc.
Bearings designed for use where high axial loads ...
Description:
Bearings designed for use where high axial loads exist and where axial positional control is required. The metric series have a 40° contact angle and a polyamide cageThe imperial series have a 20° contact angle and a machined brass cage. ...