Freewheel/Bearing CSK-P 30mm

  • RS Stock No. 146-5258
  • Mfr. Part No. CSK 30-P
  • Manufacturer Stieber
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Types CSK..P and CSK..PP are sprag type freewheels integrated into 62.. series ball bearings (except size 40). They are bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” type seals is recommended especially when the working temperature exceeds 50°C. Oil bath lubrication is also possible.

Specifications
Attribute Value
Series 62
Inside Diameter 30mm
Outside Diameter 62mm
Race Width 16mm
Torque 138Nm
Over-running Speed 4200rpm
Dynamic Load Rating 11.7kN
Static Load Rating 6.45kN
Keyway Inner and Outer Race
Drag Torque 4.4Ncm
2 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 7,000.01
(exc. VAT)
PHP 7,840.01
(inc. VAT)
units
Per Unit
1 - 4
PHP7,000.01
5 +
PHP6,719.73
Related Products
Shielded bearings are fitted with two metal dust ...
Description:
Shielded bearings are fitted with two metal dust shields to prevent ingress of dirt and foreign matter. Primarily intended for applications where the bearing inner ring rotatesIf the outer ring rotates there is a danger that grease may be lost ...
INA from Schaeffler linear ball bearings KH and ...
Description:
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which ...
Suitable for bearing mono-directional axial loadsCan support the ...
Description:
Suitable for bearing mono-directional axial loadsCan support the shaft on one side, but should not be subjected to radial loadsOne-direction axial grooved ball bearingsShaft ring, flat seal and the ballset held in a cageThese bearings come apart, so the bearing ...
Thrust bearings suitable for unidirectional axial loads, supplied ...
Description:
Thrust bearings suitable for unidirectional axial loads, supplied as three-part assemblies comprising two grooved outer raceways and a caged ball set. These bearings are not suitable for radial loads.,Typical applications include vertical shaft bearings, steering columns etc.