EMERSON – ASCO Solenoid Valve SCG256A404VMS 110/50, 2 Port, NC, 24V ac
- RS Stock No.:
- 488-485
- Mfr. Part No.:
- SCG256A404VMS 110/50
- Manufacturer:
- EMERSON – ASCO
This image is representative of the product range
Unavailable
RS will no longer stock this product.
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
PHP9,299.99
(exc. VAT)
PHP10,415.99
(inc. VAT)
- RS Stock No.:
- 488-485
- Mfr. Part No.:
- SCG256A404VMS 110/50
- Manufacturer:
- EMERSON – ASCO
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | EMERSON – ASCO | |
| Product Type | Solenoid Valve | |
| Supply Voltage | 24V ac | |
| Number of Ports | 2 | |
| Default Valve Position | NC | |
| Inlet Thread Standard | G ISO 228/1 | |
| Orifice Diameter | 2.4mm | |
| Series | 256 | |
| Application | Air, Inert Gas, Oil, Water | |
| Body Material | Brass | |
| Maximum Operating Pressure | 12 bar | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | EN 60529, IEC 335, EC Directives, UL, CSA | |
| Hazardous Area Certification | ATEX, EC | |
| Flow Factor Kv | 0.16m³/h | |
| Maximum Opening Time | 10ms | |
| Maximum Closing Time | 10ms | |
| Select all | ||
|---|---|---|
Brand EMERSON – ASCO | ||
Product Type Solenoid Valve | ||
Supply Voltage 24V ac | ||
Number of Ports 2 | ||
Default Valve Position NC | ||
Inlet Thread Standard G ISO 228/1 | ||
Orifice Diameter 2.4mm | ||
Series 256 | ||
Application Air, Inert Gas, Oil, Water | ||
Body Material Brass | ||
Maximum Operating Pressure 12 bar | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals EN 60529, IEC 335, EC Directives, UL, CSA | ||
Hazardous Area Certification ATEX, EC | ||
Flow Factor Kv 0.16m³/h | ||
Maximum Opening Time 10ms | ||
Maximum Closing Time 10ms | ||
RoHS Status: Exempt
Two-way, Direct Operated, Zero Pressure, N/C Valves
Two-way, direct acting solenoid valves, normally closed with threaded port connection.
Brass body
Pressure not required for operation
Compact & lightweight
DIN plug connection
Ranging from -10°C to +100°C
Can be mounted in any position
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.
Note
Pressure ranges are for water and may differ for other media.