PR Electronics Programmable Signal Conditioner, Programmable Transmitter, Current, RTD, Thermocouple, Voltage Input,

The 5131A is a 2-wire programmable transmitter. The transmitter is for conversion of linear resistance variation to a standard analog current / voltage signal, for example from solenoids and butterfly valves or linear movements with attached potentiometer.
This transmitter can be configured with the software program PReset using a standard PC and the Loop Link communications unit (stock-no. 796-7020).

2-wire programmable transmitter
1-channel, stock-no. 827-5491
2-channel, stock-no. 796-6893
Input for RTD, TC, mV, linear resistance, mA, and V sample
Linearized, electronic temperature measurement with RTD or TC sensor
4- or 3-wire connection automatic cable compensation or 2-wire connection with programmable cable compensation
Current input programmable in range 0-100 mA and voltage inputs in range 0-250 Vdc
4-20 mA loop output, can be configured to any current within 0-20 mA range
Voltage output range is selectable between 0-10 Vdc
Independent channel jumper selectable inputs for current/voltage or temperature
Programming can be performed with or without a power supply
3.75 kVac galvanic isolation between the channels
Configurable sensor error detection including NAMUR NE43
DIN rail mounting