Microchip MCP19110-E/MJ, PWM Current Mode Controller, 25 mA, 1.6 MHz, 4.5 → 32 V, 24-Pin QFN
- RS Stock No.:
- 799-0391
- Mfr. Part No.:
- MCP19110-E/MJ
- Manufacturer:
- Microchip
This image is representative of the product range
Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 799-0391
- Mfr. Part No.:
- MCP19110-E/MJ
- Manufacturer:
- Microchip
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Microchip | |
| Maximum Switching Frequency | 1.6 MHz | |
| Output Voltage | 0.5 → 36 V | |
| Output Current | 25 mA | |
| Control Method | Current | |
| Mounting Type | Surface Mount | |
| Fall Time | 25ns | |
| Rise Time | 25ns | |
| Package Type | QFN | |
| Topology | Buck | |
| Pin Count | 24 | |
| Dimensions | 4 x 4 x 0.85mm | |
| Maximum Duty Cycle | 50% | |
| Length | 4mm | |
| Width | 4mm | |
| Height | 0.85mm | |
| Minimum Operating Temperature | -40 °C | |
| Maximum Operating Temperature | +125 °C | |
| Select all | ||
|---|---|---|
Brand Microchip | ||
Maximum Switching Frequency 1.6 MHz | ||
Output Voltage 0.5 → 36 V | ||
Output Current 25 mA | ||
Control Method Current | ||
Mounting Type Surface Mount | ||
Fall Time 25ns | ||
Rise Time 25ns | ||
Package Type QFN | ||
Topology Buck | ||
Pin Count 24 | ||
Dimensions 4 x 4 x 0.85mm | ||
Maximum Duty Cycle 50% | ||
Length 4mm | ||
Width 4mm | ||
Height 0.85mm | ||
Minimum Operating Temperature -40 °C | ||
Maximum Operating Temperature +125 °C | ||
MCP19110/19111 PWM Controllers with 8-Bit PIC MCU
The Microchip MCP19110 and MCP19111 are analogue-based PWM Controllers that integrate an 8-bit PIC Microcontroller. The addition of an MCU allows the operating parameters of the analogue circuitry to be easily customised.
Initial device configuration can be achieved using the Microchip MPLAB® X Integrated Development Environment (IDE). Thereafter PMBus or I2C communications can be used to communicate with the device and modify the configuration.
The MCP19110 and MCP19111 are designed to operate from a single 4.5 V to 32 V supply. Integrated into the analogue circuitry are synchronous drivers, a bootstrap device, an internal linear regulator and non-volatile memory.
Initial device configuration can be achieved using the Microchip MPLAB® X Integrated Development Environment (IDE). Thereafter PMBus or I2C communications can be used to communicate with the device and modify the configuration.
The MCP19110 and MCP19111 are designed to operate from a single 4.5 V to 32 V supply. Integrated into the analogue circuitry are synchronous drivers, a bootstrap device, an internal linear regulator and non-volatile memory.
Features
Integrated 8-Bit PIC® Microcontroller
Wide Operating Voltage Range: 4.5 V to 32 V
Analogue Peak-Current Mode Pulse-Width Modulation Control
Significant Configurability including Adjustable Analogue Compensation, Switching Frequency and MOSFET Dead Time
I2C Communication Interface
Integrated Synchronous High- and Low-Side MOSFET Drivers
Integrated Current Sense
Minimal External Components Needed
Custom Algorithm Support
Wide Operating Voltage Range: 4.5 V to 32 V
Analogue Peak-Current Mode Pulse-Width Modulation Control
Significant Configurability including Adjustable Analogue Compensation, Switching Frequency and MOSFET Dead Time
I2C Communication Interface
Integrated Synchronous High- and Low-Side MOSFET Drivers
Integrated Current Sense
Minimal External Components Needed
Custom Algorithm Support
PWM (Pulse Width Modulation) Controllers, Microchip