Banner Diffuse Photoelectric Sensor, Block Sensor, 380 mm Detection Range

The MINI-BEAM2 series is just one-third the size of the original MINI-BEAM. With its impressive
sensing performance and smaller size the MINI-BEAM2 can be fitted inside machinery
where other self-contained photoelectric sensors will not be able to fit.
The set up configuration is extremely easy using the MINI-BEAM2’s push button.

Digital push-button sensitivity adjustment
Miniature plastic housing; M12 front "nose" mount or screw fixing
PNP complementary output
Multi-function LEDs for easy set-up and monitoring
Depth 23mm, height 20mm, width 8mm (body)
Full electrical protection
IP67 protection
Operating temperature range -20 to +55°C

Laser radiation is harmful to the human eye and under no circumstances should the laser beam be viewed directly or via optical instruments.

Mounting bracket

Diffuse mode sensor
Order number: 3034625

M12 x 1 connector, 4-pin
Degree of protection IP67
Sensitivity adjustable via potentiometer
Alignment indicator
Operating voltage: 5…15 VDC (NAMUR)
NAMUR output in accordance with DIN 19234 (IEC/EN 60947-5-6)

ATEX II 1G, ATEX II 2G, ATEX II 3G