ON Semiconductor, NCV8461DR2G

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The NCV8461 is a fully protected High-Side driver that can be used to switch a wide variety of loads, such as bulbs, solenoids and other activators. The device is internally protected from an overload condition by an active current limit and thermal shutdown. A diagnostic output reports OFF state open load conditions as well as thermal shutdown.

Short Circuit Protection
Thermal Shutdown with Automatic Restart
CMOS (3 V/5 V) Compatible Control Input
Off State Open Load Detection
Overvoltage Protection
Undervoltage Shutdown
Loss of Ground and Loss of VD Protection
ESD Protection
Reverse Battery Protection (with external resistor)
Very Low Standby Current
End Products
Automobiles
Applications
Switch a Variety of Resistive, Inductive and Capacitive Loads
Can Replace Electromechanical Relays and Discrete Circuits

Specifications
Attribute Value
Mounting Type Surface Mount
Package Type SOIC
Pin Count 8
Dimensions 5 x 4 x 1.5mm
Length 5mm
Width 4mm
Height 1.5mm
Maximum Operating Supply Voltage 34 V
Maximum Operating Temperature +150 °C
Minimum Operating Supply Voltage 5 V
Minimum Operating Temperature -40 °C
Automotive Standard AEC-Q100
Temporarily out of stock - back order for despatch 24/06/2020, delivery within 5 working days from desptach date
Price Each (On a Reel of 2500)
PHP 25.817
(exc. VAT)
PHP 28.915
(inc. VAT)
units
Per Unit
Per Reel*
2500 +
PHP25.817
PHP64,542.50
*price indicative
Related Products
The Microchip SEC1110/1210 family of devices are Smart ...
Description:
The Microchip SEC1110/1210 family of devices are Smart Card Bridge ICs with USB, SPI and UART interfaces. Through an effective combination of hardware and software the SEC1110 and SEC1210 offer a high-performance customisable solution. The SEC1110/1210 devices are certified to ...
Power supply voltage monitoring and supervisory circuits for ...
Description:
Power supply voltage monitoring and supervisory circuits for use in desktop, laptop and notebook computers, test and measurement instruments, portable battery-powered equipment and multiple-output power supplies.The Linear Technology series also offers front end protection with their Overcurrent/Overvoltage ...
The STMPE811 is an advanced resistive touchscreen controller ...
Description:
The STMPE811 is an advanced resistive touchscreen controller with 8-bit general purpose Input/Output (GPIO) expander. 1.8 V to 3.3 V operating voltageIntegrated 4-wire touchscreen controllerInterrupt output pinWakeup feature on each I/OSPI and I²C interface.
Floating Channel for Bootstrap Operation to +600V Typically ...
Description:
Floating Channel for Bootstrap Operation to +600V Typically 350mA/650mA Sourcing/Sinking CurrentDriving Capability for Both ChannelsExtended Allowable Negative VS Swing to -9.8V for Signal Propagation at VDD=VBS=15V 3.3V and 5V Input Logic Compatible Outputs in Phase with Input SignalsBuilt-in UVLO Functions ...