Phoenix Contact PT 1.5/S-3PV Series Grey Multi Level Terminal Block, 0.14 → 1.5mm², Triple-Level, Push In

The compact PT series from Phoenix Contact uses the advantages of the CLIPLINE complete system and is characterised by easy, direct conductor connection. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.

50 % less insertion force
Direct plugging from 0.34 mm²
Actuation button for disconnecting conductors or wiring small cross sections from 0.14 mm²
Actuation button can be operated with any kind of screwdriver
Compact design and front connection facilitate wiring in the smallest of spaces
Double bridge shaft for an individual power distribution and supply
Uniform CLIPLINE complete standard accessory

For the safe connection of electrical conductors to your control panel, choose this multi-level terminal block from Phoenix Contact. It has three levels, which feature six connections to accommodate multiple conductors at once. As it uses a push-in termination method, you'll find it easy to insert the wires without the need for tools. A broad wire capacity between 26 and 16 AWG makes it a versatile choice. Thanks to a user-friendly actuation button, you can easily disconnect the conductors using just a screwdriver.
Compact dimensions of 97.2 (length) x 3.5 (width) x 60.7mm (height) mean the unit takes up minimal space in a busy panel. The front-facing design makes it simple to connect wires in cramped settings. A voltage rating of 500V and load current of 15A means this terminal block can withstand heavy-duty applications, such as managing cable connections in plant engineering and railway control systems.

• Polyamide insulation helps maintain electrical safety
• Flammability rating of UL 94 V0 to prevent fire from spreading
• Rated surge voltage of 6kV to withstand current overload
• Low power dissipation of 0.56W for reduced energy consumption

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.