The 6LoWPAN IoT Gateway from WEPTECH is a wireless interface device that functions as a Border Router for a local 6LoWPAN network, connecting a wireless IPv6 network to servers on the Internet. A NAT64 translator is used to convert between the 6LoWPAN IPv6 sensor network protocol and IPv4 used on the Internet. The on-board transceivers provide the flexibility of wireless operation over 2.4GHz or Sub-1GHz ISM bands.
CC2538 32MHz ARM Cortex-M3 core, 2.4GHz IEEE 802.15.4 wireless SoC with 512KB Flash memory, 32KB RAM CC1200 868/915MHz IEEE 802.15.4g wireless transceiver 'Plug and Play' NAT64 or native IPv6 (Bridge Mode) Up to 32 x 6LoWPAN Child Nodes Security: AES and SHA Encryption Engine 10Base-T Ethernet connection via Microchip ENC28J60 Ethernet Controller USB 2.0 Virtual COM Port Internal antennas Power supply: +5Vdc via microUSB connector Operating System: Open-Source Contiki (http://www.contiki-os.org/) Firmware update via USB Application: Communication for the Internet of Things (IoT)
Note
This variant of the 6LoWPAN IoT Gateway is the development version and is supplied without an enclosure.
WPAN (IEEE 802.15.4), 6LoWPAN - WEPTECH elektronik
6LoWPAN (IPv6 over Low power Wireless Personal Area Networks) is a protocol which allows Internet Protocol IPv6 data packets to be sent and received over IEEE 802.15.4 compliant wireless networks. It means that low-speed Internet of Things sensor networks can communicate with servers in the Internet 'Cloud'.
Attribute
Value
Included Features
Internal Antennas, Powerful Microcontroller with AES and SHA Encryption Engine
Supported Network Interfaces
10BASE-T Ethernet (Microchip ENC28J60), 802.15.4 (2.4GHZ), 802.15.4g (Sub-GHz), Serial Interface, USB Virtual COM Port (USB 2.0 Full Speed compatible)
