Fluke calibration 8808A Bench Digital Multimeter, True RMS, 10A ac Max, 10A dc Max, 750V ac Max

This image is representative of the product range

View all Multimeters
Currently unavailable
Sorry, we don't know when this will be back in stock.
RS Stock No.:
414-193
Distrelec Article No.:
176-10-300
Mfr. Part No.:
Fluke 8808A
Manufacturer:
Fluke calibration
Find similar products by selecting one or more attributes.
Select all

Brand

Fluke calibration

Multimeter Type

Bench

Model Number p

8808A

Display Type

Digital

Functions Measured

AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Diode, Frequency, Resistance

Absolute Maximum DC Voltage Measurement

1000V dc

Absolute Maximum AC Current Measurement

10A ac

Absolute Maximum Resistance Measurement

100MΩ

Absolute Maximum DC Current Measurement

10A dc

Absolute Maximum AC Voltage Measurement

750V ac

True RMS

Yes

Maximum Frequency

100kHz

DC Current Measurement Resolution

0.001µA dc

AC Current Measurement Resolution

0.1µA ac

DC Voltage Measurement Resolution

1µV dc

Resistance Measurement Resolution

1mΩ

AC Voltage Measurement Resolution

1µV ac

Width

217mm

Best AC Current Accuracy

±0.5% + 0.12

Best AC Voltage Accuracy

±0.9% + 0.05 Digits

Height

88mm

Weight

2.1kg

Dimensions

297 x 217 x 88mm

Minimum Operating Temperature

0°C

Best Resistance Measurement Accuracy

±1.75% + 0.004

Best DC Voltage Accuracy

±0.015% + 0.003

Best DC Current Accuracy

±0.2% + 0.01

Length

297mm

Maximum Operating Temperature

+50°C

RoHS Status: Exempt

COO (Country of Origin):
CN

Fluke 8808A Multimeter , 5.5 digit


The Fluke 8808A delivers a wide variety of measurement functions, including volts, ohms, and amps, plus frequency - with a basic V dc accuracy of 0.015 %

Six dedicated instrument setup keys to instantly select saved test configurations. Ideal for making routine measurements.
Large and clear Pass and Fail indication based on user defined limits
Extreme ease of use through soft key menu access, ideal for unskilled operators
5.5 digit resolution with 0.015% basic dc V accuracy,
Dual display to measure different signal characteristics such as Volts and Current simultaneously
Dedicated current ranges to measure dc leakage current (i-Leakage mode)
Math Functions: dBm, dB, Min, Max
Patented split terminal jacks for 2x4 Ohms function for precise 4-wire low ohms measurements.
RS-232 Interface
Programming Languages/Modes: Simplified ASCI, Fluke 45
Safety Rating EN61010-1 CAT I 1000 V, CAT II 600 V

Note

Accuracy= ± (% of reading+% of range)

Supplied with

Mains lead,TL71 Test Lead Set & users manual on CD-ROM.

Eliminate production mistakes


The Fluke 8808A 5.5 digit multimeter dependably performs the most common measurements required by today’s applications. Whether you are performing functional tests or making critical measurements on test points, using the limit compare mode with pass/fail indicators eliminates production mistakes. The 8808A display has built-in enunciators that clearly show the operator whether a test passes or fails. The pass/fail indicators take the guesswork out of testing: the result is either within limits or it is out

Improve quality and efficiency


• Split terminal jacks let you carry out 4-wire measurements using only 2 leads
• Front-panel setup key allows for quick single-key access to saved setups
• Compatible with commonly used power distribution standards, for versatility
• Low-impedance amplifier and current-to-voltage conversion technique, offering accurate low-current leakage detection

Applications


• Electronics manufacture
• Laboratory-based engineers
• Factories and workshops

Manufacturing test, R&D, development and service applications demand performance and flexibility from a bench meter. This Fluke 8808A makes measurements that stand up to any scrutiny. It delivers a wide variety of measurement functions, including volts, ohms, and amps, plus frequency—all at superior accuracy and resolution.

Measure two parameters at once


The 8808A features a unique dual display that allows you to measure two different parameters of the same signal from one test connection. Looking at dual interrelated parameters like voltage and current simultaneously can reveal conditions that might go unnoticed otherwise, greatly simplifying test and troubleshooting.

Yes, this multimeter comes with a handle. If you're looking for a smaller hand-held unit, explore FLUKE's range of rugged industrial field devices (such as 606-3041).

Measure sensitive leakage current


Typical multimeters use a shunt method to measure current, creating a measurement burden voltage that increases the error in low current measurements. This makes it difficult, if not impossible, to perform tasks such as determining the true leakage current on a battery-powered device while it is powered down, or measuring small currents in sensitive circuits. The Fluke 8808A is the only multimeter in its class to use a low-impedance operational amplifier and current-to-voltage conversion technique to eliminate the burden voltage and measure sensitive low currents. In this special mode, the 8808A can accurately measure small currents with a resolution of up to 100 nA.

Perform 4-wire measurements with only two leads


Patented split terminal jacks for the 2x4-wire ohms function allow you to perform 4-wire measurements using only two leads instead of four. Today’s surface mount components make it difficult to make connections. The task becomes even more difficult when you need to use a 4-wire technique for accurate low ohms measurements. The Fluke test lead accessory combines the four wires into two test lead pairs, making it easy for you to establish connections. You get excellent resolution and accuracy, plus the convenience and ease of using a single pair of leads.