Baumer G 305 Series Optical Incremental Encoder, 125 ppr, HTL/Push Pull Signal, Solid Type, 7mm Shaft
- RS Stock No.:
- 407-1135
- Mfr. Part No.:
- G 305.010A115000
- Manufacturer:
- Baumer
This image is representative of the product range
Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 407-1135
- Mfr. Part No.:
- G 305.010A115000
- Manufacturer:
- Baumer
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Baumer | |
| Encoder Technology | Optical | |
| Pulses Per Revolution | 125 | |
| Series | G 305 | |
| Maximum Revolutions | 6000rpm | |
| Output Signal Type | HTL/Push Pull | |
| Shaft Type | Solid | |
| Supply Voltage | 10 → 30 V dc | |
| Shaft Diameter | 7mm | |
| IP Rating | IP30 | |
| Overall Width | 62mm | |
| Overall Depth | 62mm | |
| Minimum Operating Temperature | 0°C | |
| Mounting Type | Surface Mount | |
| Maximum Operating Temperature | +60°C | |
| Connection Type | Flange connector | |
| Switching Frequency | ≤10 kHz | |
| Select all | ||
|---|---|---|
Brand Baumer | ||
Encoder Technology Optical | ||
Pulses Per Revolution 125 | ||
Series G 305 | ||
Maximum Revolutions 6000rpm | ||
Output Signal Type HTL/Push Pull | ||
Shaft Type Solid | ||
Supply Voltage 10 → 30 V dc | ||
Shaft Diameter 7mm | ||
IP Rating IP30 | ||
Overall Width 62mm | ||
Overall Depth 62mm | ||
Minimum Operating Temperature 0°C | ||
Mounting Type Surface Mount | ||
Maximum Operating Temperature +60°C | ||
Connection Type Flange connector | ||
Switching Frequency ≤10 kHz | ||
- COO (Country of Origin):
- DE
G305 series incremental encoders
Range of opto-electronic, compact encoders with NPN and PNP-compatible outputs.
These encoders record and measure movement, lengths, angles, speeds of rotation etc.
They are particularly effective when used in conjunction with a tachometer to measure speed.
Output signal on Darlington FET transistor.
Screw mounting.
Cables are fitted with a DIN 5-point connector in various lengths. Must be ordered separately.
These encoders record and measure movement, lengths, angles, speeds of rotation etc.
They are particularly effective when used in conjunction with a tachometer to measure speed.
Output signal on Darlington FET transistor.
Screw mounting.
Cables are fitted with a DIN 5-point connector in various lengths. Must be ordered separately.
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
Short circuit protection
Age and temperature compensation