MENNEKES, StarTOP IP44 Blue Industrial Power Connector, Cable Mount, 2P+PE, Rated At 16A, 230V

View this category
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
RS Stock No.:
530-6224
Mfr. Part No.:
980
Manufacturer:
MENNEKES
Find similar products by selecting one or more attributes.
Select all

Brand

MENNEKES

Product Type

Industrial Power Connector

Current Rating

16A

Switched

Yes

Number of Sockets

3

Pole Configuration

2P+PE

Socket Type

CEE

Voltage

230V

Mount Type

Cable

Terminal Type

Screw

Interlocked Socket

No

IP Rating

IP44

Series

StarTOP

Colour

Blue

Standards/Approvals

No

RoHS Status: Exempt

COO (Country of Origin):
DE

StarTOP Plugs and Connectors


Glanded entry completely screwless industrial plug and connector, used to reduce installation time by approximately 60%

Connection terminals strip conductors and provide contact as terminal is pushed home

Integral pressure cable gland automatically gives strain relief and a watertight cable seal to IP44

The black connectors are for use with 500V/60Hz supplies

The green connectors are for use with 500V/100-300Hz supplies

Mennekes ProTOP & StarTOP


Plugs and sockets conforming to the latest requirements of British and European standards. The insulator outer casing and interiors are manufactured from Amaplast (nylon 6) for excellent mechanical performance from -25°C to +55°C (ambient temperature). This material provides good electrical insulation and will meet the requirements of most industrial environments.,Contact tubes and pins are made of brass. To prevent incorrect connection, the earth contact is in a different position, relative to the safety key way on each socket outlet, for each voltage.,Products are type tested to VDE.

Note

230V plug and socket stock no.s 530-6151 and 530-6230 have four pins and are for use with 230V 3-phase supply applications. They are not compatible with the standard 2P+E 3-pin planform blue 230V connectors.

Caution

Users should ensure that if these 230V 3-phase connectors are used in conjunction with an inverter, then on no account should the output be disconnected from the inverter with the load still on-line.

Related links