Schneider Electric Fuse Switch Disconnector, 2 Pole, 25A Max Current, 2 A, 10 A, 16 A, 20 A Fuse Current

Play it safe around electrics by using this fuse disconnector from Schneider Electric to protect and isolate circuits. As a two-pole device, it has no trouble safeguarding two separate circuits at the same time. The nifty pull-out holder takes standard 10.3 x 38mm fuses, so there's no need to hunt around for specialist accessories. You can choose either an AM-type fuse (such as 219-9048) for protecting motors or a GG-type (such as 188-1213) for general applications, ensuring peak loads and short circuits don't damage your equipment. As this is a captive carrier, it securely holds your fuse. There's room inside to hold an extra fuse, meaning you always have a spare to hand.

• Wide operating temperature range between -20°C and +60°C to handle harsh conditions
• Toggle on the front can be padlocked to prevent tampering and keep you safe during maintenance tasks

• Distribution boards
• Motor control
• Lighting rigs
• Heating systems

This fuse disconnector has screw terminals that achieve a reliable electrical connection. To give you flexibility, it accepts rigid and flexible cables with or without ferrules.