BK Precision Electronic DC Load, BK86, BK8602, 0 → 15 A, 0 → 500 V, 0 → 200 W, Maximum of 300

  • RS Stock No. 878-2132
  • Mfr. Part No. BK8602
  • Manufacturer BK Precision
Technical data sheets
Legislation and Compliance
Non Compliant
COO (Country of Origin): CH
Product Details

B&K Precision 8600 Series Programmable DC Electronic Loads 150W

B&K Precision 8600 Series programmable DC electronic loads provide the performance of modular system DC electronic loads in a compact benchtop form. With fast transient operation speeds up to 25 kHz, and high 16-bit measurement resolution and accuracy, these DC loads can be used for testing and evaluating a variety of DC sources such as DC power supplies, DC-DC converters, batteries, battery chargers and photovoltaic arrays. They can operate in constant current (CC), constant voltage (CV), constant resistance (CR) and constant power (CW) mode. The instrument provides flexible triggering capabilities, analog current control and monitoring and standard USB (USBTMC-compliant), GPIB or RS-232 serial interfaces for remote communication.

CC/CV/CR/CW operating modes
Transient mode up to 25 kHz
16-bit resolution voltage and current measurement of 1 mV and 0.1 mA
List mode function
Adjustable slew rate in CC mode
Short circuit test
Built-in battery test function with voltage level, capacity level, and timer stop conditions
CR-LED mode to simulate the loading behavior of typical LEDs
Remote voltage sensing to compensate for the effect of voltage drop in wires
Analog current control and monitoring
Standard USB (USBTMC-compliant), RS-232, and GPIB interfaces with SCPI protocol support
OVP/OCP/OPP/OTP and local/remote reverse voltage (LRV/RRV) protection
Compact 19" half-rack form factor allows for side-by-side rack mounting of two units

Supplied with

User manual, power cord, certificate of calibration & test report

Attribute Value
Series BK86
Constant Wattage Mode Range 0 → 200 W
Constant Voltage Mode Range 0 → 500 V
Constant Current Mode Range 0 → 15 A
Constant Resistance Mode Range Maximum of 300 mΩ
Efficiency ≤95 %
Rack Units 19 in
1 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 107,815.29
(exc. VAT)
PHP 120,753.12
(inc. VAT)
Per Unit
1 +
Related Products
The electronic DC loads series EA-EL 9000 B ...
The electronic DC loads series EA-EL 9000 B HP replace the current EA-EL 9000 HP series. They reduce the required unit height from 3U to 2U. Meaning, the steady power of 7200 W of a former EA-EL 9000 HP device ...
The new EA-EL 9000 T series of compact ...
The new EA-EL 9000 T series of compact electronic DC loads offers three tower models for the daily application in research laboratories and even schools. Lower power ratings allow for a multitude of test applications while being cost effective and ...
The LD series features electronic loads which are ...
The LD series features electronic loads which are suitable for testing and characterising a wide variety of dc power sources. They can be used to investigate the behavior of many different types of power source such as PFCs, batteries and ...
EA-EL 3000 B series, is the second generation ...
EA-EL 3000 B series, is the second generation of small desktop loads with a power rating of 400 W. It offers new voltage and current ratings for a multitude of applications for daily use in laboratories, schools or workshops. All ...