Weidmuller W Series Dark Beige Thermoelectric Voltage Terminal Block Pair, 2.5mm², Single-Level, Screw Termination, ATEX

For accurate signalling in heat-reading circuits, choose this thermoelectric voltage terminal block pair from Weidmuller. This handy device lets you wire two components together by simply pushing the conductors into its terminals before tightening the fasteners. By cutting out false signals, its built-in current bar ensures that transmissions from your thermocouple are spot-on. As the product is made from modified thermoplastic, it's resistant to heat and wear for use in harsh environments. It weighs in at just 15.54g, so it's a lightweight contender that places little strain on your DIN rail.

• Snap-on mounting for a speedy setup
• Low tightening torque of 0.4 to 0.6Nm for ease of installation by hand
• Supports wire sizes between 26 and 12AWG, so it's highly versatile

• Commercial electronics
• Industrial control and automation
• Electrical enclosures
• Aircraft engine test rigs

This terminal block pair measures just 60 (H) x 10.2 (W) x 50mm (D), so it won't take up too much space on your DIN rail.

The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. Current bars are constructed from 10 mm electrolytic copper to ensure a current loading more than nominal rating. Terminals are suitable for mounting on symmetric ’Top Hat’ rail only (BS5584:1978, EN 50022) and are touch proof in accordance with BS 3042.