Phoenix Contact3209604 PTTBS 2.5 Series Double Level Terminal Block, 0.14 → 4mm², Double-Level, Push In

The compact PT series from Phoenix Contact uses the advantages of the CLIPLINE complete system and is characterised by easy, direct conductor connection. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.

50 % less insertion force
Direct plugging from 0.34 mm²
Actuation button for disconnecting conductors or wiring small cross sections from 0.14 mm²
Actuation button can be operated with any kind of screwdriver
Compact design and front connection facilitate wiring in the smallest of spaces
Double bridge shaft for an individual power distribution and supply
Uniform CLIPLINE complete standard accessory

Neatly connect and secure your wires with this terminal block from Phoenix Contact. It's a dual-level block that makes

multiple wire connections on a single block to save space in your system. Thanks to an Underwriters' Laboratory (UL) fire safety rating of UL94V-0, you can be sure that in the event of a fire, burning will stop after 10 seconds.
This component has a broad operating temperature range of -60°C to +105°C for safe use in demanding conditions. It has a voltage rating of 500V – which means it's suitable for medium voltage applications – and can accommodate a small to medium wire size range of 26 to 12 American wire gauge (AWG), making it a versatile choice. You'll find units like this one commonly used in railway applications.

• Surge voltage of 6kV to withstand voltage spikes
• Push-in connection for quick and easy installation
• ATEX hazardous area certification makes it safe for use in hazardous or explosion prone areas
• Compact dimensions of 5.2 (W) x 55 (H) x 78mm (L) for convenient installation in small spaces

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.