ABB, Jumper Bar

  • RS Stock No. 136-3891
  • Mfr. Part No. 1SNA173452R2200
  • Manufacturer ABB
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Not assembled screw jumpers bar, - Allows connection between consecutive blocks, - Perforated jumper bar without captive screw and washer, - The perforated jumper bar must be fitted under the washer and the nut of each block.

2 stud terminals M5 x 19.5 mm 0.768 in,
Equipment: self locking nut + spring washer + washer,
18 mm 0.709 in spacing adding SCH6 or INH3,
Two jumpering options: 14 mm 0.551 in spacing with BJH14 and 18 mm 0.709 in spacing (adding INH3)
with BJH18,
NF F 61-017 designation: BE0018-FF5 (1SNA295012R1700 + SCH6 or INH3).

Specifications
Attribute Value
Accessory Type Jumper Bar
For Use With HD16/14.FF5.21 Stud Terminal Block, HD16/14.FF5.21.3 Stud Terminal Block
Temporarily out of stock - back order for despatch 18/02/2020, delivery within 5 working days from desptach date
Price Each (In a Pack of 5)
PHP 62.358
(exc. VAT)
PHP 69.841
(inc. VAT)
units
Per Unit
Per Pack*
5 +
PHP62.358
PHP311.79
*price indicative
Related Products
Feed-through Screw terminal blocks for cables with cross ...
Description:
Feed-through Screw terminal blocks for cables with cross section 2.5 to 35 mm². The terminals are equipped with integral anti-slackening protection and guarantee reliable connection in all low voltage installations. • Low profile range of terminals that enables transition from ...
One key advantage of the W-Series is the ...
Description:
One key advantage of the W-Series is the choice of plug-in (ZQV) or screw-in (WQV) cross-connections within one modular terminal. Saving substantial time in comparison to other screw terminals. Terminals available in a range of coloursScrew-in and a plug-in cross ...
For standard & double deck terminals. Permits transverse ...
Description:
For standard & double deck terminals. Permits transverse connections of up to 10 terminals (easily cut to common fewer terminals). The bar and jumper bolts are pre-assembled. The alternate jumper bar permits the interconnection of consecutive or non-consecutive blocks. Where ...
For the termination of 3 wire sensors. Common ...
Description:
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...