Phoenix Contact QUINT POWER Switched Mode DIN Rail Power Supply, 400V ac ac Input, 24V dc dc Output, 10A Output, 240W

QUINT POWER generation maximizes the availability of your plant. With some featuring the SFB technology (Selective Fusebreaking Technology), the 6-times nominal current for 12 ms, can be the first time standard circuit breakers reliable and quick trigger. Faulty current paths are selectively shut down, the error is limited and important Plant parts remain in operation.

Selective Fusebreaking Technology (CRC Technology)
Worldwide use through wide-range input for DC and AC networks
Reliable start difficult loads with static power reserve POWER BOOST
High reliability through high MTBF> 500,000 h, long power failure bridging times > 20 ms, high voltage to 300 Vac
Preventive function monitoring DC-OK by professional signaling
Slim design
Conformal coating for extreme environments (Some models)

The QUINTPOWER power supply unit's feature terminal blocks on both the top & bottom of the unit. You'll need to strip 7mm length from your cable and insert it into the terminal blocks. A simple screw connection (M4 screw) will then lock your cable into the terminal block, providing an output or input connection. However, please follow all manafactuer installation instructions.

Typically these power supplies are mounted into cabinets and are used in industrial circumstances. They can be used for automation, machinery or any project that has modules that are mounted on DIN-rails.

665-7766, 665-7769, 665-7794 and 665-7790 do not feature SFB technology

UL/C-UL Recognised (UL 60950), UL/C-UL Listed (UL 508) approved, CSA, CB, ABS

This power supply from Phoenix Contact seamlessly converts incoming alternating current (AC) into 24 volts of direct current (DC). It's specifically designed to enable coordinated circuit protection on a DC power bus.
The power supply increases overall system availability, thanks to its selective fuse breaking (SFB) technology. This enables individual circuit protection to react to a short or over-current situation and prevent damage to other circuits on the DC bus. By providing a current impulse that's enough to trip a fuse or thermal-magnetic circuit breaker, it also lets you operate supplementary protection devices that are connected downstream of the power supply.
This DIN rail mount unit's near-field communication system gives you the option of configuring the power supply using a smartphone, for quick and convenient set-up. It's ideal for applications such as industrial process control and factory automation.

• Life range of over 500,000 hours
• Switch mode type
• Weight of 1.1kg
• Minimum input voltage of 320V AC
• Minimum output voltage of 18V DC
• Dimensions of 125 (L) x 60 (W) x 130mm (H)
• Operating temperature range of -25°C to +70°C