Molex, 172677 Insulated, Tin Crimp Terminal, 24 AWG to 22 AWG
- RS Stock No.:
- 167-6241
- Mfr. Part No.:
- 172677-0100
- Manufacturer:
- Molex
This image is representative of the product range
Currently unavailable
Sorry, we don't know when this will be back in stock.
- RS Stock No.:
- 167-6241
- Mfr. Part No.:
- 172677-0100
- Manufacturer:
- Molex
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Molex | |
| Product Type | Crimp Terminal | |
| Series | 172677 | |
| Insulation | Insulated | |
| Minimum Wire Size AWG | 24 AWG | |
| Overall Length | 8.2mm | |
| Maximum Wire Size AWG | 22 AWG | |
| Contact Plating | Tin | |
| Standards/Approvals | RoHS | |
| Contact Material | Brass | |
| Select all | ||
|---|---|---|
Brand Molex | ||
Product Type Crimp Terminal | ||
Series 172677 | ||
Insulation Insulated | ||
Minimum Wire Size AWG 24 AWG | ||
Overall Length 8.2mm | ||
Maximum Wire Size AWG 22 AWG | ||
Contact Plating Tin | ||
Standards/Approvals RoHS | ||
Contact Material Brass | ||
- COO (Country of Origin):
- US
Molex SolderRight Right-Angle Direct Solder Crimp Terminals
SolderRight™ right-angle direct solder board-in crimp terminals provide an alternative to soldering bare wires onto PCB or using two piece connectors by enabling low profile right angle wire connections to be MADE direct to a PCB. These SolderRight™ direct-solder terminals have twin solder pins that provide stability for solder processing, allow redundant current paths and provide wire strain relief. Typical applications for these SolderRight™ direct-solder crimp terminals include those where there are tight packaging restraints such as vehicle electronics, laptop computers, handheld devices, power supplies, consumer appliances etc.