Schneider Electric TeSys K LC1K Contactor, 115 V ac Coil, 3-Pole, 20 A, 4 kW, 3NO, 690 V ac

These contactors, unlike relays, are specifically designed to connect to high current load devices. Used in larger-scale applications, Schneider Electrics contactors can be controlled remotely, specifically designed to switch a large amount of electrical power through its contacts.

These contractors feature varied switching voltages, many of the range feature screw clamp or a solder termination.

• Highly reliable
• Excellent quality
• Easily installed accessories

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.
AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

• Auxiliary contact blocks with serrated wiping action
• Front mount dust tight auxiliary contact blocks
• Pneumatic time delay blocks
• Transient voltage surge suppressors
• Interface modules and electronic timers
• Mechanical latching blocks

BS5424 Part 1/IEC 947, VDE 0660, NFC63 110

CSA, UL, NEMKO, DEMKO, SEMKO, FIMKO

The Schneider Electric LC1K09015FE7 is a LC1K series 4 pole Tesys K contactor used for motor control.

Poles description 4P
Pole contact composition 2 NO + 2 NC
Rated operational current 20 A
Control circuit voltage 120V AC