Allen Bradley 100 Series 100K Contactor, 24 V dc Coil, 3-Pole, 12 A, 5.5 kW, 3NO, 690 V ac

Allen-Bradley Bulletin 100-K miniature contactors are designed for commercial and light industrial applications where panel space is at a premium. These miniature devices, while 45 mm wide, are shallower and have less panel depth requirements than standard IEC contactors.The miniature contactors have been designed with flexibility in mind. They are available with AC or DC operating coils, several contact ratings. Optional 2- or 4-pole auxiliary contact blocks in a variety of auxiliary contact configurations are available separately.

Compact size
Full-voltage non-reversing and reversing contactors
Rated up to 690V
IP2X Finger Protection
Optional integrated surge suppressor
Compatible with Bulletin 193-K bimetallic overload relay
“Mirror contacts” to IEC 60947-4-1 throughout
Mechanically linked contacts to IEC 60947-5-1 on base unit
Dimensions (H)50x(W)45x(D)53mm
3 Pole plus 1 auxiliary contact

These contactors have mechanically linked performance between the main contacts and internal aux contacts, which allows status feedback if contact weld occurs. Mirror contact prevents any status condition if a NO pole welds.

• Compact size, allowing broader application use
• Choice of full-voltage non-reversing and reversing contactors
• AC and DC have the same dimensions
• IP2X Finger Protection for improved safety
• Optional integrated surge suppressor
• Fully compatible with Bulletin 193-K bimetallic overload relay
• Mechanically linked contacts to IEC 60947-5-1 on base unit
• “Mirror contacts” to IEC 60947-4-1 throughout

CE Marked
cULus Listed (File No. E41850, Guide NLDX, NLDX7)
CCC
Suitable for use with IE3 Motors (IEC 60034-30)

Use this contactor from Rockwell Automation's Allen Bradley range to control your brushed and brushless motors. It's an electromechanical device that uses a 24V direct current (DC) voltage to energise a coil and switch a motor on or off. For enhanced electrical safety, the unit comes equipped with a diode that acts as a shunt when the coil is disconnected from the supply. It also has terminals that are out of the reach of fingers for additional protection from electric shocks. You can use this general-purpose device for commercial and industrial motor-control applications.

• Power rating of 4kW for high current load applications• Thermoplastic housing material for insulation and impact resistance• Easy clip-on DIN rail mounting eliminates the need for tools• Mirror contacts for enhanced component control and safety

• CE (Conformité Européenne)• cULus (Underwriters Laboratory U.S and Canada)• CCC (China Compulsory Certificate)

Rockwell Automation is a global leader in industrial automation and digital transformation, and brings smart manufacturing to life. With a long legacy of creating Allen-Bradley® integrated control and information solutions, we help make you as productive as possible. Our portfolio of sensing, safety and motor control products can support your move towards smart machine applications. Allen-Bradley® IO-Link sensors are data-enabled and communicate with all field buses, providing diagnostic and health information about the device before a machine stops, and enabling quick production changeovers through fast parameter downloads from PLCs into the device. This reduces machine downtime and increases manufacturing OEE. For safety components, products with built-in diagnostics simplify the set-up of the smart device, and reduce maintenance, leading to a more efficient, machine data-driven approach.

In peak loads of a few seconds, the heat transfer process is slow and may not change the terminal temperature noticeably. For longer durations, the temperature rise inside the contactor could cause serious damage.

Allen Bradley MCS (Modular Control System) Contactors

A modular motor control system allowing users flexibility to design and construct an adaptable system. It has been designed to take in to account the demands and requirements of modern motors and their users; satisfying requirements up to 85AC3. A wide range of accessories are also available to cater for many diverse needs. The ease of assembly, installation and modification can bring many benefits not only those related to cost, but can reduce the number of parts which need to be held. The compact size of the component parts, bring other benefits including reduction in enclosure volume required, modern design and weight savings are also gained. By applying a modular design concept and an easy to fit 'clip-in' method, all add to the class leading features and benefits of the MCS system.

MCS features:

DIN Rail
Surface Mounting