RS PRO Angle Box Conduit Fitting, 20mm nominal size

A range of boxes incorporating two M4 tapped (50·8 mm centre) holes for lid fixing and one M4 tapped hole in base for earth screw. For suitable lid screws see stock no. 482-8644 and for suitable earth screws see stock no. 482-8650.

If you need a simple, reliable way to protect your cables and route them at an angle, this RS PRO angle box cable conduit fitting is an ideal solution. It has two M4 tapped (50·8 mm centre) holes to fix its lid for a secure closure and a neater cable arrangement. The fitting also features one M4 tapped hole in the base for an earth screw, allowing you to ground your circuits for improved safety.
The angle box's galvanised steel construction makes it extremely durable. This means it's a good choice for running cables underground and through walls, or for other heavy-duty applications where your circuits need protection from damage. Use it as part of an electrical system in a commercial space or an industrial environment, or for setting up power grids in domestic buildings.

• Nominal size of 20 mm
• Galvanised steel material meets standard BS4568 for quality
• Meets BS EN 50086 standards for cable conduits
• Conforms to ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 standards for electrostatic control

Steel To BS4568

BS4568 Part 2 product finish classification.,Class 2 - Black enamelled inside and outside.,Class 3 - Pre-galvanised sheet steel.,Class 4 - Hot dipped galvanised inside and outside.