Microchip Technology MCP2551-E/P, CAN Transceiver 1Mbit/s 1-Channel ISO 11898, 8-Pin PDIP

  • RS Stock No. 177-1965
  • Mfr. Part No. MCP2551-E/P
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

Microchip Technology CAN Transceiver

The Microchip technology 1 channel, 1Mbit/s CAN transceiver has 8 pins and PDIP package type. This device is a high speed CAN, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The Local Interconnect Network (LIN) bus supports communication in automotive networks.

Features and Benefits

• An unpowered node or brown out event will not disturb the CAN bus
• Automatic thermal shutdown protection
• Detection of ground fault (permanent dominant) on TXD input
• Externally controlled slope for reduced RFI emission
• High noise immunity due to differential bus implementation
• Implements ISO-11898 standard physical layer requirements
• Low current stand by operation
• O extended (E):-400C to 1250C
• O industrial (I):-400C to 850C
• Power on reset and voltage brown out protection
• Protection against damage due to short circuit conditions (positive or negative battery voltage)
• Protection against high voltage transients
• Suitable for 12V and 24V systems
• Temperature ranges
• Up to 112 nodes can be connected

Attribute Value
Maximum Data Rate 1Mbit/s
Number of Transceivers 1
Standard Supported ISO 11898
Maximum Supply Current 75 mA
Mounting Type Through Hole
Package Type PDIP
Pin Count 8
Dimensions 0.4 x 0.28 x 0.19in
Length 10.16mm
Width 7.11mm
Height 4.83mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Minimum Operating Supply Voltage 4.5 V
70 In Global stock for delivery within 4 - 8 working days
Price Each (In a Pack of 10)
PHP 65.45
(exc. VAT)
PHP 73.30
(inc. VAT)
Per Unit
Per Pack*
10 - 10
20 +
*price indicative
Packaging Options:
Related Products
The LTC®2875 is a robust high speed, low ...
The LTC®2875 is a robust high speed, low power CAN transceiver operating on 3.3V or 5V supplies that features ±60V overvoltage fault protection on the data transmission lines during all modes of operation, including power-down. The maximum data rate has ...
The MEC1704 is customized for embedded and industrial ...
The MEC1704 is customized for embedded and industrial computing platforms. It is available in extended temperature range of -40oC to +85oC and has 2 The MEC170x is a family of keyboard and embedded controller designs customized for notebooks and industrial ...
The Maxim family of dual RS232 line drivers ...
The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface. Maxim’s RS232 dual transmitter/receiver will allow applications such as interface translation, modem, laptop as well as RS232 battery-powered systems due ...
Intelligent high-side switches provide one or more channel ...
Intelligent high-side switches provide one or more channel MOSFET output switches to drive inductive, capacitive or resistive loads. Multipower BCD technology0.5A four independent outputs9.5 to 35V supply voltage rangeInternal current limitNon-dissipative over-current protectionThermal shutdownUnder voltage ...