Martindale FD650 Fuse Finder, Cable Detection Depth 10cm CAT III 300 V, Maximum Safe Working Voltage 600V

The Martindale elite fuse finder makes identifying poorly labelled fuses and breakers easy without the need to power down each circuit to identify the one you need to work on. The fuse finder kit is supplied with TL 83 leads with croc clips for use on lighting circuits and a mains adaptor for use on 13A sockets. This fuse finder can operate in two modes - automatic, which has a memory and auto-adjusting sensitivity for foolproof identification and manual mode, which allows very rapid fuse finding using the bar graph. It helps in easy identification of poorly labelled fuses and breakers without powering down each circuit.
Supplied with:
13A plug-in the transmitter, Elite receiver & instructions, rugged hard carry case, TL93 leads with crocodile clips, 13A mains adaptor.

LED display
Operating temperature ranges between -10°C and 40°C
The receiver has both fast manual mode and auto threshold mode set by a single sweep over the board
Trace from light fittings
Trace from one distribution board to another
Trace fuse and breakers from sockets
Tracing depth for fuse assignment: 0 -10cm, depending on local conditions

Electrical areas
Embedded systems

CAT III 300 V
IP20 rated