SKF Bearing Heater 729659 C

  • RS Stock No. 732-4726
  • Mfr. Part No. 729659 C
  • Manufacturer SKF
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): NL
Product Details

SKF Electric Hot Plate - 729659C

Installing a bearing can sometimes involve a wealth of tools and a lot of physical force. Through the use of our SKF electric hot plate, the sets of tools and force required can be heavily reduced. How is this possible? Through heating the bearing up, the material can be manipulated in a way that enables the component to be installed with ease and efficiency. (Be cautious to not heat the bearing above 125°C (257 °F) because the material may change metallurgically and produce alterations in diameter or hardness)

Features & benefits

• Suitable for components with a bore of up to 100 mm/4 In
• Suitable for components that weigh up to k kg
• Has a maximum temperature of 200°C/390°F
• Equipped with a lid for retaining heat alongside preventing dirt from contaminating the bearing or component being heated
• Thermostatically controlled, enabling the operator to have full control over the heating of the components
• The hot plate is conveniently equipped with overheating protection, automatically switching off the power in case the thermostat ever failed
• The SKF Electric Hot Plate is supplied with a fitted Schuko (CEE 7/4) two-pin plug. If a UK BS 1363 electrical plug - or other mains electrical plug is required to be fitted, the Schuko plug fitted to the Hot Plate must be removed and the alternative plug fitted by a suitably-qualified person prior to use

SKF Electric Induction Heaters and Hot Plates enable bearings and other machinery components to be heated prior to installation. The induction heaters and hot plates are suitable for use with a variety of component sizes (actual sizes accepted depend on which induction heater or hot plate is used) and individual components may be heated to 200/250°C. SKF induction heaters and hot plates are thermostatically-controlled, and for safety reasons, overheat protection is also incorporated into the units to ensure that the induction heater or hot plate is switched off in the event of thermostat failure.

Specifications
Attribute Value
Supply Voltage 230V ac
Maximum Bore Size 100mm
7 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 58,817.40
(exc. VAT)
PHP 65,875.49
(inc. VAT)
units
Per Unit
1 +
PHP58,817.40
Related Products
Sealed shielded clamps for heating cylindrical parts such ...
Description:
Sealed shielded clamps for heating cylindrical parts such as press nozzles for injecting thermoplastic materials or any other application requiring a perfect seal on resistance and electrical connection. Sealed brass band heater with folded endsSilver solder sealBand heater connection with ...
Bearing temperature is monitored with a 250°/121° temperature ...
Description:
Bearing temperature is monitored with a 250°/121° temperature indicator crayon, which is used to mark the bearing inner race. When this mark melts, the bearing is ready for mounting. Light Duty ConeMount Bearing Heater, 3/8″ – 5 3/4″ (10 – ...
On automatic models bearing temperature is monitored with ...
Description:
On automatic models bearing temperature is monitored with thermostat preset at 250°/121°, which is placed on the bearing inner race. When the inner race reaches 250°/121°, the unit and control light shut off – the bearing is ready for mounting. ...
Mica heaters are best used on flat surfaces ...
Description:
Mica heaters are best used on flat surfaces requiring heating where silicone or film heaters are not suitable for temperatures above 160 °C.These heaters must be temperature controlled and fitted correctly for best performance.Flat mica plate heaters are used in ...