Sink Drain Components

Sink drain components are items that facilitate or enhance the proper functioning of a drain. They can vary from simple rubber

plugs to bottle traps, which prevent bad smells from flowing back up through drainage pipes.

What are sink drain components used for?

Sink drain components are intended to aid the drain in its purpose of removing used water (or, in the case of sink plugs, to prevent water from escaping through it). In the event of a clog, these components must also accommodate the use of a plunger or drain auger (commonly known as a plumber's snake).

Types of sink drain components

Different types of sink drain components include types of bottle traps, also known as P-traps or U-bends. Bottle traps help to maintain hygiene standards and keep drains odour-free. Water collects in the trap and provides a block that prevents gases and foul smells from flowing back up through our drainage pipes.

Other sink drain components include sink plugs (including pop-up plugs as well as plugs that are simply inserted into the drain) and overflow-prevention devices.


...
Read more Read less

Filters

Viewing 1 - 8 of 8 products
Results per page
Description Price Type Size Material Finish
RS Stock No. 784-5706
BrandRS PRO
PHP841.26
Each
units
Slotted Basin Waste 1-1/4in Brass Chrome
RS Stock No. 784-5493
BrandRS PRO
PHP345.80
Each
units
Sink Plug 1-1/2in Brass Chrome
RS Stock No. 784-5239
BrandRS PRO
PHP323.56
Each
units
Sink Plug 1-1/2in Metal Chrome
RS Stock No. 784-5535
BrandRS PRO
PHP728.41
Each
units
Self Cutting Tap 15mm Iron -
RS Stock No. 300-5250
Mfr. Part No.315298 452306 2
BrandWatts
PHP240.16
Each
units
Sink Plug 40-45mm PVC -
RS Stock No. 300-5238
Mfr. Part No.315298 452206 5
BrandWatts
PHP227.71
Each
units
Sink Plug 35-40mm PVC -
RS Stock No. 432-0522
Mfr. Part No.526011
PHP603.14
Each
units
Slotted Basin Waste 1-1/2in Brass Chrome
RS Stock No. 300-5266
Mfr. Part No.315298 452406 9
BrandWatts
PHP241.77
Each
units
Sink Plug 45-50mm PVC -
Related Products
CMOS Logic gates with LVTTL compatible inputs and ...
Description:
CMOS Logic gates with LVTTL compatible inputs and outputs, offering higher speed and greater drive capability than 74LCX devices. Wide 1.65 to 5.5V operating supplyLVCMOS Compatible24mA source/sink capacity at 3.0V.
The Allegro Microsystems A1220, A1221, A1222, and A1223 ...
Description:
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.A south pole ...
The Allegro Microsystems A1120, A1121, A1122, A1123, and ...
Description:
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, ...
The A1225/7/9 High Temperature Hall Effect Latches are ...
Description:
The A1225/7/9 High Temperature Hall Effect Latches are temperature-stable and stress resistant suitable for operation for temperatures up to 150°C. A Schmitt trigger circuit maintains operate and release point symmetry by compensating for temperature changes in the Hall element. Internal ...