Heatsink Mounting Accessories

Heatsink mounting accessories support the attachment of heatsinks to their components. Heatsinks are passive heat exchangers: they take the heat generated by electrical or mechanical devices and transfer it to a disposable medium, often liquid coolant or air. There's a wide selection of heatsink mounting accessories, including clips, adhesive tape, retaining springs, hi-flow insulators and graphite pads. Choosing the right mounting accessories can improve your heatsink’s performance.

Types of heatsink mounting accessories

A range of heatsink mounting accessories is available, depending on your needs. Spring clips can be used with all sizes of vertical-mount heatsinks where transistors have no mounting tabs. Heatsink spring mount rivets are used to fasten a heatsink to a processor on a printed circuit board. They provide continuous pressure to a heatsink to improve the conductivity. For an alternative to screw mounting and clip mounting, adhesive tape allows a double-sided high bond-strength attachment.

Why use heatsink mounting accessories?

Heatsink mounting accessories provide greater reliability within your cooling system and ensure it can operate to its best ability. The right accessories can also contribute to reduced energy use and lower costs.


...
Read more Read less

Filters

Viewing 1 - 20 of 60 products
Results per page
Description Price Accessory Type For Use With
RS Stock No. 477-4878
Mfr. Part No.BP100-0.005-00-00-25
BrandBergquist
PHP69.103
Each (In a Pack of 10)
units
Adhesive Tape Heatsink
RS Stock No. 354-9025
Mfr. Part No.HF-S43
BrandSunhayato
PHP642.01
1 Bag of 3
Bag(s)
Double Sided Tape Heatsink
RS Stock No. 477-4862
Mfr. Part No.BP100-0.005-00-00-50
BrandBergquist
PHP190.423
Each (In a Pack of 10)
units
Adhesive Tape Heatsink
RS Stock No. 707-4815
BrandRS PRO
PHP915.93
Each
units
Thermal Interface Tape Heatsink
RS Stock No. 325-7877
Mfr. Part No.THF409-220
PHP5.117
Each (In a Pack of 10)
units
Retaining Spring SK409 Heatsink, SK459 Heatsink, TO-218, TO-220, TO-247, TO-248, TO-3P
RS Stock No. 402-456
Mfr. Part No.W4605 KIT
BrandWinslow
PHP189.88
1 Kit
Kit(s)
Transistor Mount Kit TO-220
RS Stock No. 234-2384
Mfr. Part No.CLIP 03
PHP14.419
Each (In a Pack of 10)
units
Clip PPD Heatsink
RS Stock No. 877-7086
Mfr. Part No.ILA-ADAPT-WIRESET-001
PHP996.86
Each
units
- Linear Heatsink
RS Stock No. 477-4840
Mfr. Part No.BP100-0.005-00-1112
BrandBergquist
PHP2,878.98
Each
units
Adhesive Tape Heatsink
RS Stock No. 712-8225
BrandRS PRO
PHP123.73
1 Kit
Kit(s)
Transistor Mount Kit TO-220
RS Stock No. 893-5402
Mfr. Part No.CP4A-114C-108E
BrandOhmite
PHP5,803.70
Each
units
Heatsink Four Pass Cold Plate SOT-227 Package Resistor, TA1K0 Ohmite Resistor, TA2K0 Ohmite Resistor, TAP600 Ohmite Resistor, TAP800 Ohmite Resistor
RS Stock No. 507-5829
Mfr. Part No.5901G
PHP10.407
Each (In a Pack of 25)
units
Clip TO-218, TO-220, TO-247
RS Stock No. 218-2283
Mfr. Part No.KL195CLIP
BrandSchaffner
PHP31.128
Each (In a Lot of 10)
units
Clip KL-195 Heat sink
RS Stock No. 131-1216
BrandRS PRO
PHP35.174
Each (In a Pack of 5)
units
Gull Wing Clip TO-220
RS Stock No. 722-6921
Mfr. Part No.THFU 1
PHP14.60
Each (In a Pack of 25)
units
Retaining Spring LAM Heatsink, SK Heatsink, TO-218, TO-220, TO-247, TO-248, TO-3P
RS Stock No. 504-0592
Mfr. Part No.THFM1
PHP14.288
Each (In a Pack of 10)
units
Retaining Spring TO-218, TO-220, TO-247, TO-264
RS Stock No. 189-7978
Mfr. Part No.IK341/3
PHP99.68
Each
units
Insulating Cap TO 3
RS Stock No. 403-207
Mfr. Part No.5901G
PHP10.35
Each (In a Pack of 10)
units
Clip TO-218, TO-220, TO-247
RS Stock No. 298-493
BrandRS PRO
PHP246.69
Each
units
Transistor Mount Kit SO-55, TO-3, TO-66
RS Stock No. 362-9705
Mfr. Part No.PISTOLET FILLER
BrandBergquist
PHP13,606.62
Each
units
Gap Filler Dispenser Gun Insulators
Related Products
The insulation covers consist of polyamide reinforced by ...
Description:
The insulation covers consist of polyamide reinforced by glass fibre, and the compensation sockets are made from nickel-plated brass. The push-fit sockets compensate for the varying flange heights of different transistor types.
In some applications, the GAP Pad exerts a ...
Description:
In some applications, the GAP Pad exerts a pressure unable to cope with risks of deterioration. For other applications, it is impossible to apply due to inaccessibility. To solve these problems, Bergquist has created a "GAP Pad liquid", thermal filler ...
Bond-Ply 100 is thermally conductive, double-sided pressure sensitive ...
Description:
Bond-Ply 100 is thermally conductive, double-sided pressure sensitive adhesive tape. It is designed to attain high bond strength with long term exposure to moderate heat and high humidity. Can be used instead of Heat Cure Adhesives, Screw Mounting, Clip Mounting. ...
TALON™ Clips are a new way of mounting ...
Description:
TALON™ Clips are a new way of mounting and fixing Malico BGA heatsinksHeatsinks easily snap into place and self-align with no need for additional holes or mountingFirm and uniform mount that is resilient to vibration and minor impacts Claw fixes ...