brands

attributes.Set_Type

attributes.Thread_Size

attributes.Type

attributes.Pitch

attributes.Thread_Standard

attributes.Thread_Direction

attributes.Number_of_Pieces

attributes.Overall_Length

attributes.Shank_Standard

attributes.Hand002fMachine_Tap

materials

attributes.Shank_Diameter

attributes.Shank_Type

attributes.Ring_Colour

attributes.For_Use_With

attributes.Class_of_Fit

Dormer Threading Tap HSS-XS1 1-Piece 0.4mm Pitch Metric Standard Machine Tap M2 Thread

EVENTUS Threading Tap HSS 1-Piece 0.4mm Pitch Metric Fine Standard Hand Tap M2 Thread


Threading taps are a tool used to create screw threads (tapping) into a pre-drilled hole, to create a clean fitting for bolts in metals and plastics. Used in engineering and manufacturing, threading taps work like a drill but due to the unique shape of a tap, when screwed into a piece of material, screw threads are created. Threading taps must be used in a predrilled hole and cannot be used for drilling entire holes.

The difference between taps and dies is that taps are used to create or repair threads in holes which is ideal for nuts. Dies are used to cut threads on materials such as steel rods to allow a fitting to be screwed on and attached (threading). The tap is designed for internal thread cutting, so this would be used on the fastener hole or a nut, whereas a die is used for the external thread, like on a bolt. In other words, tapping uses the tap part of the set and creates internal threads and threading is the process used by the die to cut external threads.

Threading Taps are available in HSS (high-speed steel) and carbide and can be used by hand or machine. Our range of threading taps offers the best tool for every machining method or process to meet all your requirements. Threading taps can be used with a tap wrench or power tool and are available in various sizes to accommodate a range of applications.

Taps can be used by machinists in different ways for different applications:

- Taper taps or starter taps, are used to initially start a new thread with the first 7-10 threads having a flatter profile than those further up the shaft.
- Plug taps are similar to taper taps but only have 3-5 starting rows ground down leaving more shaft to create a thread.
- Bottom taps are square in profile with no ground down threads and are used after a taper or plug tap has been used. Their full length cutting shape allow for threads to be cut at the very bottom of a hole for maximum thread length.
- Spiral flute taps – for blind hole applications
- Spiral point taps – push chips forward, ideal for through-hole applications
- Straight flute taps – most commonly, designed for short chipping materials
- Forming taps – compresses to produce a thread rather than cutting
- Taps come in both Metric and Imperial dimensions and can have different shank types. Threading taps are used in conjunction with a tap wrench so always consider the maximum side tap your wrench can hold when purchasing.


Threading Taps

Threading Tools

Hand Tools

1228569899

1370019343

1492797549

1805640584

1950438482

2911534392

2972144945

3089561311

3379516231

3702440375

3893962904

3999174723

4084450865

4292484756

482906937

595160564

607105215

630592386

1953764780

2854130884

3031041232

3606191116

3694170890

4239710393

Development Tools & Single Board Computers

Raspberry Pi, Arduino, ROCK, STEM Education & Development Tools

Electronic Components, Power & Connectors

Engineering Materials & Industrial Hardware

Pneumatic Counters, Logic Controllers & Timers

Electronics Cleaners & Protective Coatings

M2 Taps

23 Products showing for M2 Taps

Popular Searches

Related links