Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 281 - 300 of 606 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 680-1991
Mfr. Part No.62306-2
PHP2.782
Each (In a Pack of 100)
units
Pigtail 0.8mm² - 2.54mm² 8mm - 18.5AWG Uninsulated 13.5AWG - - - - -
RS Stock No. 163-8425
Mfr. Part No.32151
PHP12.22
Each (In a Box of 500)
units
Butt - 12 → 10 AWG - 14.35mm 5.74mm - Uninsulated - - - - - -
RS Stock No. 161-7863
Mfr. Part No.C-8
BrandJST
PHP14.655
Each (In a Box of 500)
units
Butt - 8 AWG, 6.64 → 10.52 mm² - 21mm 7mm - Uninsulated - - - - - -
RS Stock No. 200-7018
Mfr. Part No.C15-35-8CT
PHP66.233
Each (In a Box of 15)
units
- - - - - - - - - - - 19 x 17mm - 43.5mm
RS Stock No. 190-3750
Mfr. Part No.35762
PHP59.202
Each (In a Pack of 500)
units
Knife Disconnect - 12 → 10 AWG - 32mm 7.137mm - Insulated - - Yellow - Nylon -
RS Stock No. 136-1711
Mfr. Part No.34136
PHP31.483
Each (In a Box of 500)
units
Parallel - 12 → 10 AWG - 22.1mm 5.84mm - Insulated - - Yellow - - -
RS Stock No. 680-3076
Mfr. Part No.967398-000
PHP26.268
Each (In a Pack of 50)
units
Butt - 22 → 18 AWG - - 3.7mm - Insulated - - Red - Nylon -
RS Stock No. 200-7021
Mfr. Part No.C15-35-10CT
PHP66.233
Each (In a Box of 15)
units
- - - - - - - - - - - 19 x 17mm - 43.5mm
RS Stock No. 200-7061
Mfr. Part No.C15-16-8CT
PHP41.069
Each (In a Box of 15)
units
- - - - - - - - - - - 19 x 16mm - 39mm
RS Stock No. 669-1911
Mfr. Part No.36957
PHP478.76
Each
units
Butt - 0 AWG - 36.09mm - - Uninsulated - - - - - -
RS Stock No. 825-2287
Mfr. Part No.329251
PHP8.048
Each (In a Pack of 100)
units
- - 22 → 12 AWG - 31.75mm 11.56mm - Insulated - - Translucent - PVC -
RS Stock No. 718-7561
Mfr. Part No.280005-1
PHP3.078
Each (In a Pack of 10)
units
Open Barrel - 22 → 15 AWG - 8.13mm - - Uninsulated - - - - - -
RS Stock No. 161-4871
Mfr. Part No.34068
PHP12,790.80
1 Box of 1000
Box(es)
Butt - 16 → 14 AWG - 27.05mm - - Insulated - - Blue - PVC -
RS Stock No. 718-7454
Mfr. Part No.324487
PHP70.636
Each (In a Pack of 5)
units
Spare Wire Cap - - - 13.08mm - - Insulated - - Yellow - Nylon -
RS Stock No. 161-6188
Mfr. Part No.34318
PHP11.648
Each (In a Box of 500)
units
Parallel - 8 AWG - 9.53mm 7.52mm - Uninsulated - - - - - -
RS Stock No. 187-5427
Mfr. Part No.009286001316906
BrandAVX
PHP23.384
Each (In a Bag of 500)
units
- 0.8mm² 16 AWG, 18 AWG, 0.8 → 1 mm², 1.3 → 1.6 mm² 1.6mm² 17.5mm - - Insulated 16 AWG, 18 AWG - - - Thermoplastic -
RS Stock No. 712-2359
Mfr. Part No.6-1195131-3
PHP367.85
Each
units
Butt - 0.15 → 0.75 mm² - 27.94mm - - Insulated - - Red - - -
RS Stock No. 710-5581
Mfr. Part No.323975
PHP34.57
Each (In a Pack of 5)
units
Butt - 24 → 20 AWG - 26.29mm - - Insulated - - Natural - - -
RS Stock No. 200-6905
Mfr. Part No.C5-95-14CT
PHP182.874
Each (In a Box of 5)
units
- - - - - - - - - - - 29 x 24mm - 67.5mm
RS Stock No. 822-1384
Mfr. Part No.19164-0043
BrandMolex
PHP126.70
Each
units
Step Down Butt - 16 → 14 AWG - 39.4mm - - Insulated - - Blue - NiAc -
Related Products
ELECTRO-TAP splices offer an economic method of joining ...
Description:
ELECTRO-TAP splices offer an economic method of joining branch or tap wire to solid or stranded for wire ranges 0.5mm - 6.0mm² using insulation displacement self-stripping contacts. These ELECTRO-TAP splice connectors have colour coded nylon housings which double lock when ...
Clear shell push-wire connectors accommodate any combination of ...
Description:
Clear shell push-wire connectors accommodate any combination of 0.8 - 3.0mm² solid copper, or 'tinned end' multistrand copper conductors. Fast and easy no-twist push-in connectorsVisual confirmation of every connection and strip length shown on mouldingWire removal simply effectedRated to 105°CProbe ...
PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals ...
Description:
PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals designed for uniform reliability in the most difficult circuit environments. These PIDG wire splice terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with both ...
MiniSeal high performance immersion-resistant crimp splices designed to ...
Description:
MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is ...