- RS Stock No.:
- 130-6951
- Mfr. Part No.:
- ATZB-X-233-XPRO
- Manufacturer:
- Microchip
Discontinued product
- RS Stock No.:
- 130-6951
- Mfr. Part No.:
- ATZB-X-233-XPRO
- Manufacturer:
- Microchip
Technical data sheets
Legislation and Compliance
Product Details
ZigBit 2.4GHz AT86RF233 XMEGA Extension Board
The Atmel ZigBit™ extension board ATZB-X-233-XPRO supports the AT86RF233 +ATxmega256A3U MCU wireless module. It is used to evaluate the module and can operate stand-alone, plugged into an Xplained Pro board or wired into a developer's prototype system. The ZigBit module is compatible with a ZigBee stack that supports a self-healing, self-organizing mesh network, while optimizing network traffic and minimizing power consumption.
ZigBit ATZB-X0-256-3-0-C Module
Xplained Pro 20-pin connector
Headers for ZigBit pins not routed to Xplained Pro connector
Header for external power supply (2 x AAA batteries)
Header for monitoring ZigBit current
Header for JTAG programming
3 x User LEDs
User pushbutton
ZigBit reset pushbutton
Pre-programmed bootloader and Performance Analyzer
ZigBit ATZB-X0-256-3-0-C Wireless System-on-Module
AT86RF233 2.4GHz ISM-Band Transceiver
ATxmega256A3U microcontroller with 256KB Flash memory, 4KB EEPROM, 16KB RAM
RF Output Power: Up to +3.6dBm
Receiver sensitivity: -96dBm
Modulation: O-QPSK
16 channels @ 5MHz
OTA data rate: 250kbps (IEEE 802.15.4)
AES-128 encryption
Pre-loaded with Atmel assigned 64-bit MAC address
Serial communication: UART, USART, SPI, I2C
Up to 32 x GPIO
Built-in chip antenna
MS-147 RF test connector
Power supply: +1.8 to +3.6Vdc
Dimensions: 33 x 20 x 3.2mm
Applications: Industrial Control, Residential and commercial automation, Security, HVAC control and local communication for the Internet of Things (IoT)
Xplained Pro 20-pin connector
Headers for ZigBit pins not routed to Xplained Pro connector
Header for external power supply (2 x AAA batteries)
Header for monitoring ZigBit current
Header for JTAG programming
3 x User LEDs
User pushbutton
ZigBit reset pushbutton
Pre-programmed bootloader and Performance Analyzer
ZigBit ATZB-X0-256-3-0-C Wireless System-on-Module
AT86RF233 2.4GHz ISM-Band Transceiver
ATxmega256A3U microcontroller with 256KB Flash memory, 4KB EEPROM, 16KB RAM
RF Output Power: Up to +3.6dBm
Receiver sensitivity: -96dBm
Modulation: O-QPSK
16 channels @ 5MHz
OTA data rate: 250kbps (IEEE 802.15.4)
AES-128 encryption
Pre-loaded with Atmel assigned 64-bit MAC address
Serial communication: UART, USART, SPI, I2C
Up to 32 x GPIO
Built-in chip antenna
MS-147 RF test connector
Power supply: +1.8 to +3.6Vdc
Dimensions: 33 x 20 x 3.2mm
Applications: Industrial Control, Residential and commercial automation, Security, HVAC control and local communication for the Internet of Things (IoT)
Note
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Specifications
Attribute | Value |
---|---|
RF Technology | Extension Board |
Classification | Expansion Board |
Kit Classification | Evaluation Kit |
Technology | Extension Board |
Kit Name | Xplained Pro Zigbit |