Cypress Semiconductor CY7C68013A-56PVXC, USB Controller, 480Mbit/s, USB 1.1, USB 2.0, 3.3 V, 56-Pin SSOP

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

USB Controllers, Hi-Speed USB Peripherals, EZ-USB, Cypress Semiconductor

EZ-USB AT2LP implements a bridge function between a USB port and one or two ATA- or ATAPI-based mass storage device ports.
EZ-USB FX2LP is low-power, highly integrated USB 2.0 microcontroller.
EZ-USB NX2LP-Flex is a fixed-function, low-power programmable USB to NAND controller.

USB 2.0 USB IF Hi-Speed certified (TID # 40460272)
Single-chip integrated USB 2.0 transceiver, smart SIE, and enhanced 8051 microprocessor
Fit-, form-, and function-compatible with the FX2
Pin-compatible0
Object-code-compatible
Functionally compatible (FX2LP is a superset)
Ultra-low power: ICC no more than 85 mA in any mode
Ideal for bus- and battery-powered applications
Software: 8051 code runs from:
Internal RAM, which is downloaded through USB
Internal RAM, which is loaded from EEPROM
External memory device (128-pin package)
16 KB of on-chip code/data RAM
Four programmable BULK, INTERRUPT, and ISOCHRONOUS endpoints
Buffering options: Double, triple, and quad
Additional programmable (BULK/INTERRUPT) 64-byte endpoint
8-bit or 16-bit external data interface
Smart media standard ECC generation
GPIF™ (general programmable interface)
Enables direct connection to most parallel interfaces
Programmable waveform descriptors and configuration registers to define waveforms
Supports multiple ready (RDY) inputs and control (CTL) outputs
Integrated, industry-standard, enhanced 8051
48-MHz, 24-MHz, or 12-MHz CPU operation
Four clocks per instruction cycle
Two USARTs
Three counter/timers
Expanded interrupt system
Two data pointers
3.3-V operation with 5-V tolerant inputs
Vectored USB interrupts and GPIF/FIFO interrupts
Separate data buffers for the setup and data portions of a CONTROL transfer
Integrated I2C controller, runs at 100 or 400 kHz[1]
Four integrated FIFOs
Integrated glue logic and FIFOs lower system cost
Automatic conversion to and from 16-bit buses
Master or slave operation
Uses external clock or asynchronous strobes
Easy interface to ASIC and DSP ICs
Available in commercial and industrial temperature grades (all packages except VFBGA)
Features (CY7C68013A/14A only)
CY7C68014A: Ideal for battery-powered applications
Suspend current: 100 μA (typ)
CY7C68013A: Ideal for non battery-powered applications
Suspend current: 300 μA (typ)
Available in five Pb-free packages with up to 40 GPIOs
128-pin TQFP (40 GPIOs), 100-pin TQFP (40 GPIOs), 56-pin QFN (24 GPIOs), 56-pin SSOP (24 GPIOs), and 56-pin VFBGA (24 GPIOs)
CY7C68016A: Ideal for battery-powered applications
Suspend current: 100 μA (typ)
CY7C68015A: Ideal for non battery-powered applications
Suspend current: 300 μA (typ)
Available in Pb-free 56-pin QFN package (26 GPIOs)
Two more GPIOs than CY7C68013A/14A enabling additional features in the same footprint

USB (Universal Serial Bus), Cypress Semiconductor

USB is a cable bus supporting data exchange between a host computer and a wide range of simultaneously accessible peripherals. There is a differential signal data interface for transmit and receive communication path. The bus includes power at 5 Volts.

Specifications
Attribute Value
Number of Transceivers 1
Data Rate 480Mbit/s
Protocols Supported USB 1.1, USB 2.0
Power Supply Type Single
ESD Protection Yes
Typical Single Supply Voltage 3.3 V
Mounting Type Surface Mount
Package Type SSOP
Pin Count 56
Dimensions 18.54 x 7.6 x 2.4mm
Height 2.4mm
Length 18.54mm
Maximum Operating Temperature +75 °C
Width 7.6mm
Minimum Operating Temperature 0 °C
145 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 617.92
(exc. VAT)
PHP 692.07
(inc. VAT)
units
Per Unit
1 - 9
PHP617.92
10 - 49
PHP535.05
50 - 99
PHP454.58
100 - 499
PHP421.24
500 +
PHP387.87
Packaging Options: