FTDI Chip FT232RL USB to Serial UART 3MBd, 28-Pin, SSOP

  • RS Stock No. 406-580
  • Mfr. Part No. FT232RL
  • Manufacturer FTDI Chip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

FT232R - USB to Serial UART with Clock Generator, FTDI Chip

The FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic.

A unique number, the FTDIChip-ID, is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle. It can then be used to protect customer application software from being copied. Royalty-free drivers for the most common operating systems are available from FTDI website. http://www.ftdichip.com

The FT232R is available in compact 28-pin SSOP (RS 406-580) and 32-pin QFN (RS 730-0168) packages.

Features & Benefits

• Single chip USB to asynchronous serial data transfer interface.
• Entire USB protocol handled on the chip. No USB-specific firmware programming required.
• Fully integrated 1024-bit EEPROM storing device descriptors and CBUS I/O configuration.
• Fully integrated USB termination resistors.
• Fully integrated clock generation with no external crystal required plus optional clock output
• Data transfer rates from 300 Baud to 3 MBaud (RS422, RS485, RS232) at TTL levels.
• 128 B receive buffer and 256 B transmit buffer utilising buffer smoothing technology to allow for high data throughput

Applications

USB Industrial Control
USB bar code readers
USB Digital camera interface
USB wireless modems
PDA to USB Transfers
USB Card readers
USB FLASH card readers and writers
USB Audio and low bandwidth video data transfer

Specifications
Attribute Value
Number of Channels per Chip 1
Transmit FIFO 128B
Receive FIFO 256B
Maximum Data Rate 3MBd
Mounting Type Surface Mount
Package Type SSOP
Pin Count 28
Dimensions 10.2 x 5.3 x 1.75mm
Length 10.2mm
Width 5.3mm
Height 1.75mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
5 Within 4 working day(s)
1816 Within 5 working day(s) (Global stock)
Price Each
PHP 252.99
(exc. VAT)
PHP 283.35
(inc. VAT)
units
Per Unit
1 - 9
PHP252.99
10 - 99
PHP242.68
100 - 999
PHP230.65
1000 - 2499
PHP195.86
2500 +
PHP186.41
Packaging Options:
Related Products
The FT200XD and FT201X ICs are Full Speed ...
Description:
The FT200XD and FT201X ICs are Full Speed USB 2.0 devices that offer a compact bridge to I²C bus. The devices can acknowledge I²C bus data, capable of operating up to 3.4 Mbps, with low power consumption (8 mA). They ...
The FT240X, a Full Speed USB 2.0 IC ...
Description:
The FT240X, a Full Speed USB 2.0 IC offers a compact bridge to 8-bit wide FIFO interfaces. The device is a First-In First-Out (FIFO) data buffer, capable of operating up to 1 Mega Byte per second, with low power consumption ...
USB is a cable bus supporting data exchange ...
Description:
USB is a cable bus supporting data exchange between a host computer and a wide range of simultaneously accessible peripherals. There is a differential signal data interface for transmit and receive communication path. The bus includes power at 5 Volts. ...
The Microchip Technology PDIP package, through-hole mount 14-pin ...
Description:
The Microchip Technology PDIP package, through-hole mount 14-pin USB bridge microcontroller has a voltage rating ranging between 3V and 5.5V. This device reduces external components by integrating the USB termination resistors and the oscillator needed for USB operation. It is ...