Murata Power Solutions Non-Isolated DC-DC Converter, 12V dc Input, 3.3V dc Output, 1.5A

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Murata 1.5A Single Output Non-Isolated DC-DC Converter - OKI Series

The Murata PS OKI-78SR Series is built on a 10.4 by 16.5 mm, single inline package SIP module, these DC/DC converters are non-isolated switching regulator for embedded applications. Two nominal output voltages are offered, each with 1.5 Amp maximum output. Based on fixed-frequency buck switching topology, the high efficiency means very low heat and little electrical noise, requiring no external components. The ultra-wide input range is 7 to 36 Volts DC. Protection features include short circuit current limit protection. The OKI-78SR switching regulator is designed to meet all standards approvals. RoHS-6 (no lead) hazardous material compliance is specified as standard.

Features & Benefits

Ultra wide 7 to 36 VDC input range
Fixed Outputs of 3.3 or 5 VDC up to 1.5 Amps
Vertical or horizontal SIP-mount, small footprint package
“No heat sink” direct replacement for 3-terminal 78xx-series linear regulators
High efficiency with no external components
Short circuit protection
Outstanding thermal derating performance


UL/EN/IEC 60950-1, 2nd Edition

Attribute Value
Input Voltage 12V dc
Output Voltage 3.3V dc
Number of Outputs 1
Output Current 1.5A
Power Rating 4.95W
Mounting Type Through Hole
Package TO-220
Minimum Temperature -40°C
Maximum Temperature +85°C
Efficiency 85.5%
MTBF 78700000h
Load Regulation ±0.4%
Line Regulation ±0.25%
Ripple And Noise 40mV Pk-Pk
Allowed Circuit Configurations Parallel
Length 10.4mm
Series OKI-78SR
Power Signal Conversion Type DC-DC
Rated Output Power 4.95W
Maximum Input Current 480mA
Width 8.6mm
Depth 16.5mm
Protection Features Short Circuit Protection
Switching Frequency Range 500kHz
Weight 2g
Temporarily out of stock - back order for despatch 17/08/2020, delivery within 6 working days from desptach date
Price 1 Reel of 360
PHP 97,601.76
(exc. VAT)
PHP 109,313.97
(inc. VAT)
Per Reel
Per Unit*
1 - 1
2 - 2
3 +
*price indicative
Related Products
50W to 54W isolated DC to DC converters ...
50W to 54W isolated DC to DC converters with wide output and compact sixteenth brick DOSA package. These isolated DC to DC converters have full isolation of 2250 VDC and high ripple and noise specifications along with self-protection features to ...
Low profile 0.43" industry standard quarter-brick package/pinout2kVdc isolation ...
Low profile 0.43" industry standard quarter-brick package/pinout2kVdc isolation minimum4:1 input voltage rangeOn/off control, trim & sense functionsOutput overvoltage protectionFully I/O and thermal shutdown protected.
The Murata CME series of DC-DC converters are ...
The Murata CME series of DC-DC converters are cost effective and come in industry standard packages with industry standard pin-out. The galvanic isolation of these DC-DC converters allows the device to be configured to provide an isolated negative rail in ...
TEC 3 is a new series with the design purpose to improve the prevalent 3 Watt SIP-8 DC/DC converters in terms of cost, efficiency and performance. The latest technology and components effectuate a high efficiency for a low thermal loss. ...