Bourns 28 V 10kA 1800 Signal & Data Line Protector, DIN Rail Mounting

  • RS Stock No. 851-8237
  • Mfr. Part No. 1820-28-A3
  • Manufacturer Bourns
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CR
Product Details

Bourns 1800 Series Signal and data line Protection Devices

Bourns1800 Series Signal and data line Protection Devices (SPD) have low peak clamping voltage even during severe current surges and the ability to repeatedly protect against high surge currents up to rated limits
1800 Series SPDs are convenient in mounting and grounding to any flat surface or to DIN-1 (TS-32) or DIN-3 (TS-35) rail
Cable shields are passed through and may be either grounded or arc-protected to ground
They have vibration-resistant screw-type clamp terminals and flame-resistant epoxy-filled housing
Applications include Computers, Data communication, Instrumentation, Broadcasting and Industrial controls

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Specifications
Attribute Value
Suppressor Type Signal & Data Line Protector
Maximum Voltage Rating 28 V
Mounting Type DIN Rail
Maximum Surge Current 10kA
Series 1800
Length 83.31mm
Depth 18.8mm
Height 45.47mm
Dimensions 83.31 x 18.8 x 45.47mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +60°C
Temporarily out of stock - back order for despatch 17/04/2020, delivery within 5 working days from desptach date
Price Each
PHP 4,725.00
(exc. VAT)
PHP 5,292.00
(inc. VAT)
units
Per Unit
1 +
PHP4,725.00
Related Products
Combined Category C, B tested protector suitable to ...
Description:
Combined Category C, B tested protector suitable to protect Satellite and Master antenna TV systems. For use on lines running within buildings at boundaries up to LPZ 1 to through to LPZ 3 to protect sensitive electronic equipment. Very low ...
The ABB OVR series surge suppressor unit is ...
Description:
The ABB OVR series surge suppressor unit is a protective device to ensure that electrical equipment is not damaged by a sudden voltage spike. It is a combined category D, C, B tested protector suitable for twisted pair signalling applications, ...
Hivoltguard protects all electronic equipment against over voltage, ...
Description:
Hivoltguard protects all electronic equipment against over voltage, surges, and spikes. Fridgeguard protects against low voltage conditions which are specifically harmful to all motors, pumps, and compressors in fridges and freezers. Automatically disconnects when mains "BAD"Automatically reconnects again when ...
Meets BS6651:1992 Appendix CBABT tested and approvedFully tested ...
Description:
Meets BS6651:1992 Appendix CBABT tested and approvedFully tested to IEC1000-4-5Low let-through voltageMains voltage cross-over protectionFitted BT plugAuto-reset.