Freewheel Built-In ASNU 12mm

  • RS Stock No. 146-5269
  • Mfr. Part No. ASNU 12
  • Manufacturer Stieber
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. A typical arrangement is to install this type alongside a bearing within the same location tolerances. The inner race is keyed to the shaft. The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission. If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2.

Specifications
Attribute Value
Series 63
Inside Diameter 12mm
Outside Diameter 35mm
Race Width 13mm
Torque 12Nm
Over-running Speed 3300 (Inner) rpm, 50000 (Outer) rpm
Keyway Inner and Outer Race
Drag Torque 1.6Ncm
3 In Global stock for delivery within 4 - 8 working days
Price Each
PHP 8,763.18
(exc. VAT)
PHP 9,814.76
(inc. VAT)
units
Per Unit
1 - 4
PHP8,763.18
5 +
PHP8,517.96
Related Products
INA from Schaeffler drawn cup roller clutches are ...
Description:
INA from Schaeffler drawn cup roller clutches are one-way clutches comprising thin‑walled, drawn outer rings with a series of ramps on the inside diameter. There are also plastic cages, pressure springs and needle rollers. They can transmit high torques in ...
Types CSK..P and CSK..PP are sprag type freewheels ...
Description:
Types CSK..P and CSK..PP are sprag type freewheels integrated into 62.. series ball bearings (except size 40). They are bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” type seals ...
Types CSK..P and CSK..PP are sprag type freewheels ...
Description:
Types CSK..P and CSK..PP are sprag type freewheels integrated into 62.. series ball bearings (except size 40). They are bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” type seals ...
Type CSK is a sprag type freewheel integrated ...
Description:
Type CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40). It is bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. The use of additional “nylos” ...