Siemens 3RS70, Converter Signal Conditioner, Current 0 → 20 mA Input, 4 → 20 mA Output

  • RS Stock No. 134-8036
  • Mfr. Part No. 3RS7002-2DE00
  • Manufacturer Siemens
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

SIRIUS 3RS70 Signal Converter

Siemens Sirius 3RS70 signal converters perform the coupling function for analogue signals on both the input side and the output side. They are indispensable when processing analogue values with electronic controls. Under harsh industrial conditions in particular, it is often necessary to transmit analogue signals over long distances. Electrical separation is then needed as a result of the different power supplies. The resistance of the wiring causes potential differences and losses which must be prevented.

Electromagnetic disturbance and overvoltage’s can affect the signals on the input side in particular or even destroy the analogue modules. All terminals of the 3RS70 signal converters are safe up to a voltage of 30 V dc and protected against switching poles. Short circuit protection is an especially important function for the outputs.

Thanks to galvanic separation, the signal converters prevent mutual interference between the analogue channels. Thanks to the narrow and compact design, they take up little space on the mounting rail, particularly in flat control boxes and control cabinets with small gaps between tiers.

The high-quality, modern design in titanium grey contributes to the integrated appearance matching all other Siemens devices in the control cabinet. Active and passive single-range, multi-range and universal converters are available with various supply voltages and connection types for various analogue standard signals and other common sensor signals.

Features and Benefits

  • Narrow width

  • Easy to set universal converters

  • Converters with frequency output

  • All ranges are fully calibrated

  • Integrated manual/automatic switch with a setpoint generator

  • Outputs are short circuit proof

  • Up to 30 V - protected against damage caused by wiring errors

Attribute Value
Input Range 0 → 20 mA
Output Range 4 → 20 mA
Supply Voltage 24 V ac/dc
Mounting Type Snap On
Minimum Operating Temperature -25°C
Maximum Operating Temperature +60°C
Standards Met DIN EN 61346-2, DIN EN 81346-2, IEC 60068-2-27, IEC 60068-2-6, IEC 60664, IEC 60947-1, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC61000-4-5
Operating Temperature Range -25 → +60 °C
Number of Channels 1
Termination Spring-Loaded
Series 3RS70
1 In Global stock for delivery within 4 - 8 working days
Price Each
Was PHP10,804.00
PHP 10,204.38
(exc. VAT)
PHP 11,428.91
(inc. VAT)
Per Unit
1 +
Related Products
Wago 857 series JUMPFLEX millivolt signal conditioner converts ...
Wago 857 series JUMPFLEX millivolt signal conditioner converts input millivolt signals into an analogue standard signal on the output side. PC configuration interface Switching between measurement ranges is calibrated Clipping capability allows analogue signal limitation to output end values Safe ...
Single channel signal processors for use with insertion ...
Single channel signal processors for use with insertion flow sensors that do not have internal control logic options available with digital or analogue output. Finger protectionLED indication of flow conditionsSimple switch point set up using potentiometers500Ω load (max.)PNP Output8-pole, 18mm ...
Monitoring or control of temperature - 50°C to ...
Monitoring or control of temperature - 50°C to +300°C in 5 rangesCompensated 3-wire PT100 sensor operationAdjustable setpointHysteresis adjustable ±0.5 to 20% of selected rangeInversion of the relay contact function - heating/cooling control0-10V analogue outputs for both Setpoint and Measured valueLED ...
The micro-processor controlled single-phase power controller Jumo TYA ...
The micro-processor controlled single-phase power controller Jumo TYA 201 displays all parameters in a backlighted LCD display and is operated using the 4 keys on the front.SCR power controllers are employed where larger resistive and inductive loads have to be ...